ATPD40200 2D GRAPHIC 5-AXIS CNC SYNCHRO BRAKE PRESS.
STANDARD CONFIGURATION
• 2D Graphic operator control. Touchscreen DA66T
• 5- Axis Y1, Y2, X , R ,C
• Y1/Y2 Electro-hydraulic levelling with 0.01mm positioning tolerance.
• Automatic compensation of the side frame deflection
• X-R backgauge.
• HOERBIGER servo hydraulic system.
• CNC controlled crowning table
• Laser Safety light guard at the front of the machine. (Laser Beam under top tool).
• Laser curtain at the rear of the machine
• European style gooseneck top tooling in 835mm lengths.
• European style multi V-die in 835mm lengths
• Electro-hydraulic levelling by synchro system.
• 2 Sliding Front support arms
• Foot pedal control
• Operation, programming and maintenance manual.
• Foot pedal control
• USB flash memory drive
• Network card.
MACHINE SPECIFICATIONS:
• Maximum Tonnage: 2000Kn (200T)
• Bending length: 4200mm
• Distance between frames: 3700mm
• Gap inside frames: 400mm
• Daylight opening: 400mm
• Max stroke length: 200mm
• Weight: 12,500Kgs
In the ATP range of machine we manufacture models starting from 1500mm x 63T up to 6000mm x 600T in standard above ground configuration.
SYNCHRONIZED BEAM CONTROL
In this system, the Y1 and Y2 axes operate as independent double acting hydraulic systems. Both axes share the same oil supply, but the flow to the valves as well as true position(s) of the ram are entirely and separately controlled by computer command. The CNC reads the ram position from independent linear encoders while monitoring and adjusting the proportional valves, producing a double-closed loop system.
Accuracy is further ensured by mounting the linear encoders on a C-frame connected to the bed, rather than on the side frames, so deflection of the side frames and pressure loads do not affect positioning.
The synchro system is such that it easily allows tandem operation to obtain working lengths up to 20m. In this configuration, machines can work independently as two separate machines with different applications or in tandem mode as one machine with double capacity and double bending length.
Delem DA66T 2D GRAPHICAL OPERATOR CONTROL
The Delem DA66T 2D graphical control is a multi-axis control, designed for making pressbrake productions easier, faster and more reliable. Thanks to the user-friendly interface, the programming of a press brake is no longer complicated. With an extensive memory for programs, material and tool library, this control is ideal for the production of many different series.
With the easy and intuitive drawing methods, a 2D part is drawn in just seconds. Graphical support ensures that no more mistakes are made during the concept of the work-piece. The Delem DA66T is then capable of generating a bending sequence of the drawn part. This happens automatically, while still leaving the possibility to intervene manually.
The accuracy of the DA66T is obtained due to the extensive editing possibilities of the machine tooling. The detailed graphical simulation of the tool editor results in a clear view of one of the most important aspects in bending productions: Your tooling.
X-R BACKGAUGE
A high-speed 2-axis backgauge system, servo driven, on high-precision ball-screws. The width adjustment is done manually, by means of a quick release system. Machine is standard delivered with 2 stops, but can be upgraded to 4 fingers, or more, depending on the length of machine.