EMA-250 AUTOMATIC END MATCHING MACHINE
The EMA-250 end matcher has been designed in Australia and purpose built to handle the wide variety of timber processed in the region. With a proven design track record over the past 9 years there are currently over 50 similar machines operating throughout the country and overseas. The EMA-250 is built to the latest design standards incorporating a number of time saving and safety devices and with the ability to process material as short as 270mm and as wide as 250mm.
STANDARD FEATURES:
Solid fabricated steel construction
No off-cuts:- all material extracted as shavings
Positive feeding due to opposed feed rollers (5 sets top & bottom)
Easy set up due to constant diameter tooling
“Shear” angle cutters for cleaner cutting of end grain
Touch screen control with fault diagnostics
Lineal metre & piece count (including pre-determined pack sizes)
Simultaneous top & side clamping for square cutting
SPECIFICATIONS:
Maximum length of timber No limit
Minimum length of timber 270mm
Maximum width of timber 250mm
Minimum width of timber 40mm
Maximum thickness of timber 35mm
Minimum thickness of timber 10mm
Feed speed 90m/min
Processing speed 24m/min (approx.)
Clamping Pneumatic (top & side)
Spindle motors 4.0kw (x2)
Feed motor 0.75kw
Infeed conveyor 4.0m (powered)
Outfeed conveyor 4.0m (static)
Working pressure 5kg/cm2
Electrical supply 415v, 3ph, 50hz
Control circuit 24v
INCLUDED WITH MACHINE:
Set of T&G cutters
Set of operating tools
Operation manual
*Disclaimer*
Note: All photos and pricing are indicative only and have been prepared in good faith and with due care. Photos provided may include some optional features. Please contact us for an accurate quotation.
Facebook
Twitter
Email a Friend
RACEVIEW, QLD
Print
******8170 
