1). ATLAS COPCO MAS+ GA55PP 55Kw 75hp 8.5 BAR 320CFM 51 l/s 123 psi MARINE SPECIFICATION ROTARY SCREW COMPRESSOR * LOW HOURS * Year 2013 MADE IN BELGIUM Including Water-Cooled Option (Connect to Water Tower)
Suits High Temperature Environments (See Below) Including SANDBLASTING, MINING etc, In Storage Since March 2016, Good Condition, Rare Opportunity, Fraction of Replacement Cost - HUGE PRICE REDUCTION!
SALE TO 30/4/24 $ 7,450 + GST ($ 8,195 INCLUDING GST). REFER ATTACHED BROCHURE.
** SEE FEATURE LIST BELOW **
- OPTIONAL: PNEUTECH RDF459 459CFM REFRIGERATED AIR DRYER 240v / FILTER, AS NEW - POA
- OPTIONAL: VERTICAL FOCUS 750/1,000 LITRE AIR RECEIVER TANK AUSTRALIAN MADE NEW - POA
- OPTIONAL: ATLAS COPCO OIL/WATER SEPARATOR MADE IN BELGIUM Year 2005 AS NEW - POA
HUGE PRICE REDUCTION!.
2). ATLAS COPCO G22FF 22kw 30hp 415v 9.75 BAR 110CFM 51.71 l/sec 3-IN-1 ROTARY SCREW COMPRESSOR Year 2016 INCLUDING BUILT-IN REFRIGERATED AIR DRYER / AUTO DRAIN 240v MOUNTED ON 500 LITRE AIR RECEIVER TANK, GENUINE LOW LOAD HOURS (TBC), REGULAR SERVICING, FULLY FEATURED MODEL. VERY GOOD CONDITION. HALF NEW PRICE
SALE TO 30/4/24 $ 11,950 + GST ($ 13,145 INCLUDING GST). REQUEST BROCHURE / EXTRA PHOTOS.
3). AIRHORSE AHB 30A 22kw 30hp 415v 8 BAR ROTARY SCREW COMPRESSOR Year 11/2018 HEAVY DUTY PACKAGE INCLUDING REFRIGERATED AIR DRYER / AUTO DRAIN 240v / 3 x INLINE FILTERS PLUS 1,000 LITRE VERTICAL AIR RECEIVER TANK, GENUINE LOW LOAD 1148 HOURS, REGULAR SERVICING, TOP CONDITION. PACKAGE DEAL:
SALE TO 30/4/24 $ 8,150 + GST ($ 8,965 INCLUDING GST) COMPRESSOR, AIR DRYER / 3 x FILTERS AND AIR TANK.
5). CHAMPION MARATHON CSF22 by SULLAIR 22kw 30hp 415v 7.8 BAR 131CFM ROTARY SCREW COMPRESSOR Year 2004, MADE IN AUSTRALIA FOR AUSTRALIAN CONDITIONS, ITALIAN AIREND, GENUINE 10,957 HOURS, GOOD CONDITION
SALE TO 30/4/24 $ 5,450 + GST ($ 5,995 INCLUDING GST)
- OPTIONAL: VERTICAL FOCUS 750 LITRE AIR RECEIVER TANK MADE IN AUSTRALIA NEW - POA
- OPTIONAL: LUOWEI LW-30AC 150CFM REFRIGERATED AIR DRYER Year 2017 - POA
REQUEST EXTRA PHOTOS. REQUEST BROCHURE.
.6). KAESER BSD 81 45kw 60hp 415v 11 BAR ROTARY SCREW COMPRESSOR Year 2008 GERMANY - POA. DETAILS TO COME
7). PNEUTECH RDF459/AC 459CFM 240v REFRIGERATED AIR DRYER / FILTER Year 2018 AS NEW CONDITION
SALE TO 30/4/24 $ 4,250 + GST ($ 4,675 INCLUDING GST). REQUEST BROCHURE. 1/2 PRICE - SAVE $ 4,2555 + GST!
8). HANKISON SPX HES3000 3,180CFM 16 BAR 415v REFRIGERATED AIR DRYER Year 2015 MADE IN USA, HEAVY DUTY, AS NEW CONDITION. FEATURING 'COLD WAVE TECHNOLOGY'
SALE TO 30/4/24 $ 11,450 + GST ($ 12,595 INCLUDED). REQUEST BROCHURE / EXTRA PHOT0S.
FRACTION OF NEW PRICE!
9). COMPAIR CS2400 OIL WATER SEPARATOR, AIR OPERATION, AS NEW CONDITION, BARGAIN
SALE TO 30/4/24 $ 750 + GST ($ 825 INCLUDING GST).
REQUEST EXTRA PHOTOS.
10). AIR RECEVER TANKS AUSTRALIAN MADE 150/300/750/2,000/2,500/10,000 LITRES FROM $ 900 + GST ($ 990 INCL GST).
** FEATURES of ATLAS COPCO MAS+ GA55PP MARINE SCREW COMPRESSOR:
MAS compressors are specifically designed for the harsh environments on board marine and offshore applications. They can be delivered as air-cooled, water-cooled or energy recovery version.
The compressors are standard equipped with a tropical thermostat or in case of air-cooled versions with a fan saver cycle, to keep the oil temperature high in order to avoid condensation. All compressors can be delivered with Inventory Hazardous Material information (Green passport).
Whereas the MAS version does not have approvals, the MAS+ has all available approvals.
The screw elements and oil separator are highly efficient. As a result, the compressed air only has 2-3 ppm oil carry-over at maximum flow and pressure. The compressor is designed for 55°C ambient temperature, while 45°C can be delivered upon request.
The controller has voltage-free contacts for alarms and read-out and a remote control is standard foreseen. Due to the state-of-the-art element and sophisticated control and monitoring, the compressors have the highest efficiency in the market.
Oil-injected Screw Compressors MAS 5-90 (5-90 kW):
Derived from the premium GA range these units are not only fully equipped, but feature a patented oil filter, integrated refrigerant dryer (option) and sophisticated controller algorithms to complete these state-of-the-art compressors and ensure quick and easy installation.
While minimising operational losses via an optimum oil vessel design, the oil temperature is maintained above condensation level for ideal lubrication and optimum lifetime.
From 30 kW upwards, freshwater cooling is available to remove the compressor heat.
Smaller units have a brazed plate cooler whereas from 110 kW tube stack coolers are used.
By adjusting the cooling flow, the air outlet temperature can remain within requested limits, providing ideal approach temperature for downstream equipment like dryers, inert gas generators, etc. Expensive outlet ducting can be avoided.
As the unit is supplied with a 3.5” graphic Elektronikon®, all pressure and temperature
measurements can be monitored.
• Premium MAS quality
• Longest service intervals
• Coated coolers
• Quick & easy installation
• Narrow band pressure regulating at the package discharge
• Integrated water separator & electronic drains