HACO - MUBEA BEAM DRILL LINE

The MUBEA-DRILLFLEX, is a CNC controlled drilling machine mainly applied in various fabrication shops that wish to drill all kinds of profiles such as sections and beams, with high accuracy.

The principal profiles are flat bars, sections and square/rectangular hollow sections. Drilling the correct hole pattern is made possible thanks to programming this pattern via the CNC controlling system.

The MUBEA-DRILLFLEX type DF-1100 is capable of processing below profiles by means of horizontal drilling of holes with maximum diameter of 40 mm. (Option 50mm). The position and accuracy of the holes to be drilled is determined by the CNC program.

Some of the sections that can be processed are:

Flat bar : positioned vertically
Angles : equal or unequal leg according to DIN1028 en DIN1029
U-sections (Channels) : (UPN) DIN 1026
I-beams : (IPN) (IPE) DIN 1025
Z profiles : DIN 1027
T-beams : DIN 1024
H-beams : HE
Square/rectangular hollow sections

The section volume of the profiles has a minimum and maximum value, both horizontally and vertically, of respectively 30 en 1100 mm.

STANDARD EXECUTION Type DF-1100/12

The basic, standard model features a working length of 12.200 mm (40 Ft).
Other possible working lengths are:
Type DF-1100/15 working length 15.250 mm (50 Ft)
Type DF-1100/18 working length 18.300 mm (60 Ft)
Type DF-1100/21 working length 21.350 mm (70 Ft)
Type DF-1100/24 working length 24.400 mm (80 Ft)