New Hafco Metalmaster Milling Machine for sale - HM-54GV Turret Milling Machine Inverter Variable S

HM-54GV Turret Milling Machine Inverter Variable S
1 of 20
Play Video
Advert Tools: Watch this
$6,490 AUD
($7,139 GST Inclusive)
Confirm with seller if any additional fees or charges apply
Condition: New
Type of Sale: In Stock
Year: Not specified
Make: Hafco Metalmaster
Model: HM-54GV
Subcategory: Vertical & Horizontal Mills
Sellers stock ID: M579
New Hafco Metalmaster Vertical & Horizontal Mills:
HAFCO METALMASTER HM-54GV Turret Milling Machine Inverter Variable Speed & Geared Head - Horizontal & Vertical (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System
Order Code: M579

This HM-54GV geared head vertical and horizontal turret milling machine now includes a inverter variable speed drive on the vertical spindle, with a powerful continuous-load 1.5kW / 2hp motor, intended for trade use. The work table is precision made with adjustable dovetail guides and is recognised for its 600mm X axis by 200mm Y axis travel. There is a three armed handle on the side for drilling also incorporating a fine feed control hand wheel on the front for milling. Two levers mounted on right side of milling head enables quick change off the geared spindle speeds.

Other features include 3-Axis digital readout system, taper roller bearing support for the spindle, easy-to-read drilling depth stop, low voltage LED work light, 150mm machine vice, 8 piece metric collet chuck set, coolant system, X axis power feed unit, drill chuck, 1" & 1-1/4" horizontal arbors, 2 & 3 morse taper adaptors. The combination of generous sized vertical support and rugged cast iron construction throughout reduces vibration and guarantees accurate and chatter-free operation.

Extra Features:
Swivel table
1" & 1-1/4" horizontal arbors

Electronic inverter variable spindle speeds
3 Axis digital readout system
Swivel table left & right with graduated scale
Mill head tilts to ±45º left to right
450mm horizontally sliding and rotating ram
NT30 Horizontal and vertical spindles that are hardened and ground
Precision-ground dovetail slide-ways and table
Precision milling table incorporating machined T slots
Rear concertina slide-way cover
Forward and reverse button switch
Fine hand wheel operated quill feed
Swarf & splash tray
Spindle lock for quill
Metric dial graduations @ 0.02mm for X Y & Z-Axis
Vertical dial graduations on hand wheel @ 0.05mm
All slides utilise dovetail construction for maximum rigidity
Includes 1" & 1-1/4" arbors for the horizontal spindle

* Note: X & Y travels maybe reduced due to digital readout scales and safety stops
* Note: Optional Y & Z power feeds require additional parts & fitting (not included)

- Electronic inverter variable spindle speeds
- 3 Axis digital readout system
- X-Axis power-feed
- Safety cutter guard
- Swarf tray
- Coolant system
- LED work light
- 150mm machine vice
- Drill chuck & arbor
- NT30 to 3MT adaptor
- 2MT & 3MT adaptors
- 8-piece metric collet chuck set (4-16mm)

Model: HM-54GV
Digital Readout: 3-Axis Digital Readout
Type: Vertical & Horizontal
Table Size: 1000 x 240mm
Spindle Taper - Vertical: NT30
Spindle Taper - Horizontal: NT30
Longitudinal Travel (X-Axis): 600mm *
Cross Travel (Y-Axis): 200mm *
Vertical Travel (Z-Axis): 340mm
Type of Slides: Dovetail
Ram Travel: 450mm
Spindle to Table: 375mm
Quill Travel / Diameter: 120mm / 90mm
Throat Depth (max.): 640mm
Tilting Head (Left ~ Right): ±45º
Tilting Head (Forward ~ Back): Fixed
Drilling Capacity: 40mm
End Milling Capacity: 25mm
Face Milling Capacity: 80mm
Power Feed - Quill: Manual
Power Feed - Longitudinal (X-Axis): 20 - 720mm/min
Power Feed - Cross (Y-Axis): Optional *
Power Feed - Vertical (Z-Axis): Optional *
Table T-Slot Size: 14mm
Work Table Load Capacity: 160kg
Spindle Speeds Vertical (steps/rpm): Variable (100-2000rpm)
Spindle Speeds Horizontal (steps/rpm): 9 (60-1350rpm)
Motor Power - Vertical: 1.5kW / 2hp
Motor Power - Horizontal: 1.5kW / 2hp
Motor Voltage: 240V
Overall Height: 2200mm
Weight (nett): 900kg

To Purchase Online Please Visit The Machineryhouse Website & Search For 'M579'

Visit us in-store at:
Sydney - Unit 1, 2 Windsor Road, Northmead NSW 2152
Brisbane - 625 Boundary Road, Coopers Plains QLD 4108
Melbourne - 1 Fowler Road, Dandenong VIC 3175
Perth - 41-43 Abernethy Road, Belmont WA 6104

Call 1300 294 943 When prompted, enter ID-CODE:222976
Hare & Forbes MachineryHouse
We Deliver Australia Wide
Sep 2007
4608 (View all)
Contact the seller
1300 294 943 When prompted, enter ID-CODE:222976

Subscribe to updates
Share this Advert
Machines4u Facebook page Machines4u Google+ Machines4u Twitter Email a Friend