With this mechanical grab barrier walls can be gripped absolutely safe without leaving any marks on the concrete elements. Even densly stacked asymetrically elements can be lifted and installed easily due to the slim des....
Enables concrete products such as manhole-basers to be turned around 180 after production turning range 360 endless . Supplied without connecting hoses to the fork lift truck. Further information Because the products are....
Specially designed for operation in silicate block factories. With crane boom, hydraulic continuous rotator, hydraulic swing damper and rubber grippers for handling silicate blocks gently. Different models to cope with s....
Description Bale Clamp with Rotator Attachment, Cascade, type 60F-RC, hydraulic, max 2500 kg S No 17514-00004P unit weight 1934lbs Should you require any additional information,contact Tony Vince Chad Industry Attachment....
The RBC Bale Clamp is designed to efficiently handle baled products or blocks. FEATURES Enable forklift operator to clamp unpalletised loads Commonly used for handling baled products like waste paper, cotton, wool, texti....
Specially designed for heavy duty work with fork lift trucks. For gripping heavier loads, or packs produced on multi-layer production machines. In particular used in conjunction with steel finger grippers. Can also be us....
A hydraulically extendable suspension point to extend the clamp forward of the fork lift truck. When using the distance adjustment, take note of the following points The stability of the fork lift truck can be guaranteed....
With a fastening for fixing directly onto the lift ing plate. Attention Change-over time to use with forks approx. 5 minutes. Different models are available depending on the use. Further information 2-arm module for good....
A hydraulic grab attachment for transporting up to 3 manhole rings with a height of 500 mm 19 inch . An adjustment to the widths is done hydraulically prior to the clamping action. This hydraulic change-over means that t....
Specially designed for heavy duty work with fork lift trucks. For gripping heavier loads, or packs produced on multi-layer production machines. In particular used in conjunction with steel finger grippers. Can also be us....
Fitted between the clamp and the fork sleeves crane boom, enabling stacks to be lifted and deposited, according to requirements. Working Load Limit WLL kg 6000 Weight Dead Weight kg 42 Angle Pivoting- Rotation Angle Degr....
Fitted between the clamp and the fork sleeves crane boom, enabling stacks to be lifted and deposited, according to requirements. Working Load Limit WLL kg 7500 Weight Dead Weight kg 56 Angle Pivoting- Rotation Angle Degr....
Specially designed for the safe gripping of un-strapped and un-compressed stacks of multilayer production. The same characteristics as the STAZ-UNI but equipped with a four-sided clamping action. Because the main and the....
Keep your worksite running safely and efficiently with our range of high quality new and second hand forklifts from leading brands including Toyota, Hangcha, Nissan, Mitsubish and Hyster. All our forklifts come with a co....
Also suitable for manhole rings DIN 4034 Part 1 and 2 due to its extra-deep claws and rubber supports. Adjusted to the dimensions of the manhole ring by bolts. As only the side wall is gripped, no radial pressure is exer....
Supplied without connecting hoses to the fork lift truck. Further information Makes the handling of concrete pipes after production far more efficient. Due to large surfaced pressure pads, little pressure is exerted onto....
Specially designed for heavy duty work with fork lift trucks. For gripping heavier loads, or packs produced on multi-layer production machines. In particular used in conjunction with steel finger grippers. Can also be us....
The same characteristics as the STAZ-UNI but, due to an additional hydraulically spreadable centre divider it can be used to lift 2 stacks at the same time if they are standing across on the conveyor belt. Supplied witho....