Toku s medium hydraulic breaker range is ideal for excavators from 5.5 to 25 tonne. With five models in the range, there is a hammer to suit every need. Ideal for a variety of applications ranging from tunneling, foundat....
The FARMTECH CZ-M Chisel Plough is available with 7, 9, 11 or 13 tines and is mounted to tractors by a three-point linkage system. In comparison with other chisels, non-soldered steel rolled iron is used for the tines. S....
8 x 5 Tandem Trailer with Rhino XN18 Excavator 1.8 T Package including attachments Trailer Australian Made locally 8x 5 Tandem 2.8 T GVM internal tie down points slide away ramps bucket rest side steps Excavator Hydraulic quick hitch, Hydraulic Thumb, Swing boom and Expanding tracks with Pilot Control Joysticks. 1800 KG operating weight ROPS FOPS Cage at the front Joystick Control Full Hydraulic Quick Hitch fitted standard - we are responding to customer feedback - you asked for it we got it. Hydraulic Thumb - foot pedal operation Swing Boom to reach tight spaces Expanding Tracks Jap....
The FARMTECH CZ-M Chisel Plough is available with 5, 9, 11 or 13 tines and is mounted to tractors by a three-point linkage system. In comparison with other chisels, non-soldered steel rolled iron is used for the tines. S....
If you have concrete or rock to break up and move, this will suit you perfectly. No more manual jack hammering which damages your hands and spine from the constant vibration EDT 200 Hydraulic Hammer Rock Breaker Operatio....
The FARMTECH CZ-M Chisel Plough is available with 5, 9, 11 or 13 tines and is mounted to tractors by a three-point linkage system. In comparison with other chisels, non-soldered steel rolled iron is used for the tines. S....
A heavy duty floor stripper with interchangeable blades. The Blastrac BMS-220ADB is a ride-on stripper with the added benefit of being battery operated for increased versatility. The Blastrac BMS-220ADB ride-on stripper ....
The FARMTECH CZ-M Chisel Plough is available with 5, 7, 11 or 13 tines and is mounted to tractors by a three-point linkage system. In comparison with other chisels, non-soldered steel rolled iron is used for the tines. S....
The CZ-M Chisel Plough is available with 5, 7, 9, or 11 tines and is mounted to tractors by a three-point linkage system. In comparison with other chisels, non-soldered steel rolled iron is used for the tines. Since it s....
The FARMTECH Agri CZ-M Chisel Plough is available with 5, 7, 9 or 13 tines and is mounted to tractors by a three-point linkage system. In comparison with other chisels, non-soldered steel rolled iron is used for the tine....
The FARMTECH Agri CZ-M Chisel Plough is available with 5, 7, 9 or 13 tines and is mounted to tractors by a three-point linkage system. In comparison with other chisels, non-soldered steel rolled iron is used for the tine....
Air operated Lance with 4 whisper nozzles. Pipe approx 6 inches long x 1 2 diameter. Hand held or placed in a fixed location. Ideal for cooling, cleaning, blowing or drying parts. Low Noise. Air consumption is about 50cf....
With 4000 blows-per-minute and a 1 stroke, the 182 is a powerful and durable chisel scaler. The swan neck grip option add an extra level of comfort for both vertical and horizontal operation. This air powered chisel scal....
Technical Specifications Category Impact Wrench Type Pistol Grip Drive 1 Square Drive Max Torque ft-lb 1200 Max Torque ft-lb 1400 Reverse Torque ft-lb 1200 Reverse Torque ft-lb 1400 Free Speed rpm 6500 Avg. Air Consumpt....
Heavy Duty Air Needle Scaling Hammer, 4,000bpm CAPS C153 Technical Specifications Category Scalers Type In-line BPM 4000 Avg. Air Consumption CFM 9 Hose 3 8 Air Inlet 1 4 BSP Stroke 50.5mm Length 410mm Weight approx. shi....
Make fast work of body panel crimping and cutting, bushing driving, shearing and general front end work with this air hammer - a super duty tool that produces up to 3000 blows per minute. It features an alloyed steel bar....
Toku s mini hydraulic breaker range features hammers suited to excavators from 0.7 6.0 tonne. While they are compact in design, Toku s TNB Mini series packs a punch with impressive impact rate and force. Suited to a vari....
The RC29M corner chisel allows to cut the radiuses left by the bit on the corners of the trimmed recesses for hinges, giving an exact 90 corner.It can cut radiuses up to 20 mm with a cutting depth of 6 mm. Solid ergonomi....