New King Rich Vertical Mills:
King Rich machines are known for their precision, stability, durability and dependability. This reputation results from their strong commitment to quality. Being made in Taiwan, the finish and rigidity in all King Rich machines make them a great choice for a huge variety of machining processes.
Standaco Machinery Sales has been the sole distributor for King Rich Machines for over 25 years, we stand by their extremely high quality and reliability with a 12 month warranty. For more information on our products please visit us on our website at .standaco or on our facebook page at .facebook/standaco.
QUALITY FEATURES
• Infinitely variable speed head
• Cooling fan to aid in reducing the working temperature of the head.
• 1.6 mm of Furon turcite is fitted to the lower slideway of the saddle to enhance the wear resistance, load capacity and smoothness of cross movement.
• The upper slideway of the saddle is hard chromed.
• The ram adaptor uses 8 bolts for clamping the forward and backward movement of the head. This increases head rigidity, a vast improvement over the old 4-bolt style.
• All castings are of high grade Meehanite cast iron and are of a rigid design. Check out the quill housing size on some of our competitor's machines.
• P4 (class 7) angular contact bearings are used to support the high precision spindle
• The lead screw nuts are two-piece for rapid backlash adjustment.
• A collar is used to retain the main motor spring which is much more reliable than the usual cir clip used by others.
• Only quality components are used through out the machine. e.g. one piece pinion shaft and not two piece as supplied on some inferior machines
Specifications
Spindle Driver Motor 5 HP Variable speed head
Spindle speeds range
( Variable Head ) Low : 70 - 460 rpm
High : 460 - 3,600 rpm ( 50 Hz )
Spindle taper ISO 40
Table size 305 x 1372 mm
T - Slots 3 15.9 mm 3 off
Longitudinal travel - X axis 863 mm
Cross travel - Y axis 400 mm
Knee travel - Z axis 406 mm
Ram travel 450 mm
Quill power feeds .038 / .076 / .152 mm
Quill travel 127 mm
Quill diameter 105 mm
Swivel on turret 360°
Head tilt front - to - back 45° - 0 - 45°
Head tilt left to right 90° - 0 - 90°
Spindle nose to table surface 110-517 mm
Net weight approx 1650 kgs
Standard:
* American red Turcite on X and Y axes
* Dovetail slideways on X axis
* Square slideways on Y, Z axes
* Hardened and ground X, Y, Z axes and table
* 1.5 HP A.C. rapid vertical motor
* Power longitudinal feed
* Electrics system
* Hand operated one shot lubrication system
* Coolant pump
* Metal coolant tray
* 60mm raised column
Optional:
* Inverter head
* Air power drawbar
* DRO system
* X and Y axes ballscrews
* Power cross feed
* Auto lubrication
* working light
* Roller type Y axis up-down chip guard
* Fiberglass coolant tray