PREMIUM LASER MARKING WORKSTATION
XL-Box has been designed to increase productivity. This workstation is fully dedicated to marking or engraving components. It is equipped with a fibre laser source doped with Ytterbium which allows light or deep markings of alphanumeric codes- barcode and 2D Data Matrix codes, on all metals and some plastics. Results are high-contrast markings produced in some hundredth of a second that can be human-readable or verified by a camera.
MECHANICAL TECHNICAL FEATURES
Marking window 170 x 170mm or 100 x 100 mm
External dimensions (l x d x h) 655 x 756 x 1020 mm
Working area 570 x 564 mm
Marked part dimensions Max.height 370 mm, Max.lenght 570 mm
Security Class 1 Configuration
Control PC-based operation
ELECTRONIC TECHNICAL FEATURES
The XL-Box fiber laser has been designed to operate with the rack-controller Fiber Unit
Source Pulsed Ytterbium fiber laser
Operation Mode Pulsed (20 to 500 kHz)
Wavelenght 1064 nm
Optical fiber lenght 3m
Average power 10,20W, or 50W
Peak power 10 kw
Positionning / focus built-in laser pointer
Cooling Air-cooled only
SOFTWARE
XL-Box laser is operating on a PC based mode, using software as interface. The creation of files and parameters setting can be done from the PC via the software SIC Laser PC. A full range of options is available in order to optimize the cycle time, or improve contrast and colours, by changing mainly speed, frequency and power.
- Creation and editing functions of marking files ( drawing, text, barcode, Data matrix...)
- Several pen settings (speed, power, frequency...)
- Fonts available: True type, 1D barcode, 2D Data matrix
- Import of pictures ( .bmp .jpg) and vectorial files ( .plt/.dxf/.ai)
- Database function: link with external files (.txt/.xls)
- Marking of cylindrical parts available
- Integrated input/output
******3636
