New Kdt Hot Melt Edgebander:
Feed Speed. 12 – 20 m/min
Angle Adjustment Range. 0 – 45 degrees
Edge Thickness. 0.4 – 2mm
Panel Thickness @ 45deg. 9 - 25mm Minimum Panel Length. 150mm
Minimum Panel Width. 125mm
Machine Size. 6607 x 830 x 1610mm
Overall Power. 16.91kw
Pre-milling of angled or inclined edge up to 45º.
Pre-milling of square edge.
Hot melt glue application of square edge.
Grooving back surface of edge strip with pneumatic pressure pad.
Hot melt glue application of inclined edge.
Edge strip application with pneumatic guillotine.
Hot air blower on edge strip to assist bending.
Pressing rollers for square edge and inclined edge.
End trimming saws for flush trim.
First top and bottom trimming unit – straight cutting tips.
Second top and bottom trimming unit – radius cutting tips.
Radius top and bottom scraper unit for fine finish.
All stations fitted counters for exact adjustments.
Flat top and bottom surface scrapers.
Oscillating top and bottom buffing units.
Full safety covers over motorized cutting and trimming units.
Convenient electrical control touch screen at infeed position.
Fluorescent lights inside safety hoods.
High feed rates – 12, 16 or 20 metres/min.
Feed jogging button to assist setting up.
Pneumatic shut-off gate on glue roller.
Front and rear tape overlap adjustment from electrical control touch screen.
Large 3” (75mm) dust exhaust hoses on trimming units for efficient extraction.
Large windows in safety hoods for better visibility.
Diamond tipped cutter heads on twin spindle pre-milling station.
Pneumatic gate prevents panels being fed in too close to one another.
Motorized height setting of top beam for different panel thicknesses.
High precision slide ways on cut-off saws.
Efficient high frequency motors on saws and trimmers.
Pneumatic blowers on scraper tracer wheels to keep swarf from affecting accuracy.
Mop buff units mounted on 50mm round bars – will not flex under load.
1440rpm motors on buffs to prevent scorching.
Length of machine – 6607mm.