MEP FALCON 302 Coldsaw

CHECK THE VIDEO FOR GOOD MACHINE DEMO!!!!

FALCON 302, manual sawing machine to cut metals from 45º right to 45º left using an HSS blade. This high performance model has a heavy cast iron structure and is equipped with all the devices and functions necessary so as to cut in a precise and safe manner.
FALCON 302 is available as a bench model or eventually with the steel base. Furthermore it can be supplied with three-phase motor at one or two speeds.

A FEW FEATURES:
-Electric panel (wiring totally identifiable, main lockable disconnect switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device 24 V).
-Blade shaft assembled on spheroidal cast iron eccentric bushing.
-Bronze gear mounted with key and ring nut so as to grant the maximum hold.- Worm screw shaft mounted on a pair of bushings.
-IP55 control handle.
-Clamping system by means of vice screw which slides on taper slide with adjustable gib.
-The front vice jaw has an axial adjustment so as to clamp the material as close as possible to the cutting line.
-Adjustable steel anti-burr device.
-Electric submerged pump at 48 V to lubro-refrigerate blade.
-Double head return spring.
-Adjustable stop to make cuts of the same length.
-Machine predisposed to be hoisted.
-The machine is supplied without saw blade.
-Service keys and instructions manual for maintenance and spare parts list.

Price does not include base.

Fully complies to Australian safety standards 4024.1