This is the model all the rest have tried to copy but never managed to get the recipe right.
SHARK 281, manual band sawing machine to cut from 0º to 60º left. This model is available in the manual version or with the Cut Control System (CCS).
In this version, the sawing machine can make single cuts without operator, using the head weight controlled by a spring and a hydraulic brake.
The vice on the pneumatic versions (MA) opens and closes by means of a manually operated valve (or by means of a footpedal which is instead optional).
A FEW FEATURES:
-Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle.
-Vice with fast clamping device.
-Hydraulic transducer to visualize band tensioning.
-Electric pump for band lubrication and cooling.
-Wire chip brush for band cleaning.
-Double head return spring.
-Adjustable rod to measure stop to make cuts of the same length with millimetred steel rod.
-Stock support arm with roller predisposed to mount loading table.
-Bi-metal band for solids and sections.
-Service keys and instructions manual for maintenance and spare parts list.
Fully complies to Australian safety standards 4024.1