New El-gra Post Driver:
Mounting: Skid Steer, Tractor or Excavator
Hydraulic Flow: 25-100 L/min
Max Post Height: 2.5m
Max Post Diamater: 9" / 225mm
The EL-GRA percussion post driver is a hydraulic attachment with a percussion driver on a mast which drives posts into the ground. It also has a no-hands swing into place auger driver which is used to pre-drill holes before driving the posts into heavy ground. Various size augers and driving templates are available to suit different post options.
3 point linkage, Excavator or Skid Steer mounts available
Adjustable Down Force on Power Head
Continuous Hitting Power from Start to Finish
Custom size post guides available
No Greasing Required
Side Tilt: East/West = 18 degrees
For/Aft Tilt: North/South = 12 degrees
Hydraulic Swing on Auger into Drill Position
With the Power Head raised at full extension you only have 120kg of weight at full height. Compared to free fall hammers where you can have 220-400kg, this can make them very unsafe on steep slopes.
The Power Head can not be dry fired, main head requires material (post) under it to allow the head to retract up inside the main body, this then allows the head to start beating at the same time you activate the retract head lever. Once the post is in the ground at your set height, you let the levers spring into the center. The main Power Head ram has an adjustable valve, this allows you to set different pressures on the head. Once you activate the lever you get continuous hits from 450-950bpm. The Power Head Series also comes with hands free hydraulic swing auger into the drill position, it also has hydraulic down force for those tough jobs.