Shaw Bend Panbrakes have Australian Patent on the shape of the fingers, which allows a tighter return, 10mm U.
The Bottom Bed has removable sections, angle iron, apron and bed for TDF or air conditioning ducting etc.
Australian Patent on the clamping device, which allows you to keep the same setting for 0.5mm to 2mm material. No need to keep adjusting nuts for the clamping thickness.
Ideal for TDF and TDC flanges for the Air conditioning and Duct Forming industry
Optional Extra: Cleat bending bottom bed for ducting
New Series Combination 2450mm (8ft) manual Panbrake
2mm Capacity
Removable Top and Bottom Bed
Australian Design and Australian Patent Fingers
(1250mm/ 4ft x 3mm is also available)
SPECIFICATIONS
Length up to 2450mm Capacity up to 2mm mild steel / 14g mild steel
High bending angle of 0-130 degrees
Greatest depth of box bent 220 mm
Amount of lift of clamping beam 200mm
STRUCTURAL & OPERATING FEATURES
SEGMENTED and removable fingers on top clamping beam
EXCLUSIVE Segmented and removable fingers on BOTTOM BENDING apron for turn down 50mm for splash backs or Air Conditioning turn down
Manually operated clamp for efficient operation of machine
High structural rigidity from heavy plate steel box construction with continuous welded seams
Special provision for re-setting and aligning the machine throughout it’s lifetime
Spherical bearings for smooth ease of operation of the clamping mechanism
Replaceable bronze bushes at all points of wear
Grease nipples at all wear points
Variable combination width of bending fingers both clamping and folding
Prices listed are subject to change and are GST exclusive