Interested in: A finger folding press bed width between 2.4m and 1.5m.
Manual, powered or hydraulic operation on sheet metal.
Location: Mackay, Queensland
Brand specific: No
Price range: Up to $3000, open to other quotes
Time frame: Just looking at ...
HI I'm after a linisher to clean up chainsaw bar edges so needs to me about 1m long and single phase and safe for my employees to use and with metal abrasive belts, let me know what you might have available and a price on shipping to Burnie Tasmania or If you know of somewhere in Melb...
I need a roller to roll brass strip. the strip is 1mm thick and between 10mm and 15mm wide. I need to make it round ,but tapered at the same time ,the taper is not much say about 3-4mm from top to bottom.
Circular saw for cutting sheets, 0.8mm thick sheets. Would prefer to be able to rotate the saw and cut across the length of the sheets instead of the width.
no specific brands
Budget just an estimation wasn't sure how much it costs, but would be happy to talk to anyone about it
hi we are switchboard manufacturers in seaford victoria and we use 1.6mm zinc anneal mainly
i am chasing a hydraulic gillotine and a hydraulic pan brake both to handle 2.5 sheets and a punch and shear
they can be used or new can you please check stock and give me a price and availability
Setting up a new Factory - sheetmetal.
PH: Mobile best number
After a good brand
Vulcan 1000D 3 metre x 1.5 metre table delivered and commissioned Sydney
-New 16 station TDF machine c/w 16g pitts fitted outboard delivered to Sydney
-16g Pittsburgh de...