A Single Phase MIG Package That’s Big On Power.
The Weldmatic 270 is the most powerful WIA single phase MIG welding
machine. Ideal for light to medium industrial fabrication and rural workshops
the 270 outperforms its competition when it comes to welding performance.
Packed with professional features you’d expect in an industrial 3 phase MIG
machine, the 270 is for serious welders who want results.
Featuring a Fan-on-Demand™ cooling system, the Weldmatic 270 improves
efficiency, reduces maintenance and provides a safer working environment.
Built with quality components and manufactured with 3 years warranty, the
Weldmatic 270 can withstand tough Australian conditions.
SUITABLE APPLICATIONS
Rural Workshops
Light to Medium Fabrication
Body Shops and Maintenance
WELDABLE MATERIALS
Steel
Stainless Steel
Aluminium
PACKAGE INCLUDES
W Roll Drive Wirefeeder
Euro Gun Cable (3m)
Work Lead (10m)
Interconnecting Leads (10m) Gas Regulator
Gas Regulator
Tips (0.6/0.8/0.9/1.2mm)
Drive Rollers 0.6/0.8mm V Groove; 0.9/1.2mm Knurled (Gasless)
SPECIFICATIONS
Primary Voltage: 240 VAC-50/60Hz
Rated Primary Current: 25.3 Amps
Max Primary Current: 56 Amps
Recommended Generator Power: 13.5 kVa
Supply Plug: 15 Amp
IP Rating: IP21S
Weight: 115kg
Warranty: 3 Years
Standards Compliance: AS60974.1 & AS1674.2 (VRD)
MIG SPECIFICATION
Output Range: 30A/15.5V-270A/27.5V
Rated Output 40°C (10min): 270A/27.5V 20%, 150A/21.5V 60%, 120A/20V 100%
Wire Size Range: 0.6/0.8/0.9/1.2mm
Material Thickness Range: Welds up to 8mm steel plate, single pass
FEATURES
— 270 A single phase MIG welder
— 270 A at 27.5 V 20% Duty Cycle
— Fan-on-Demand™ Cooling Fan – Reduces noise, energy use and contaminates
— Built-In Thermal Protection – Prevents the machine from operating beyond its safe thermal zone
— Arc Start - modifies arc starting condition, wire accelerates at different speed depending on application
— Four geared wire drive - Provides a consistent, smooth, and strong drive for a variety of wires
— Burn Back – Controls how far the wire burns back to the tip on completion of the welding operation
— Spot Timer – Provides short weld times for repetitive spot welds
— Creep Mode – Provides slow wire speed until weld starts - ideal for aluminium starts
— Suitable wires - Gas-shielded and gasless flux-cored wires
— Spool capacity - Takes 5kg and 15kg spools
— IP21S rating - For environmental/safety protection
— Generator compatible – 13.5 kVa