90mm pin, 800mm Turners Engineering Excavator GP & Trenching Bucket suit 20-48 ton machine. The Pin Holes could be bored out to take 100mm Pins (see list of machines it should then fit below...).
It has tapered sides so mud slides out easy and minimises ground resistance and there are extra wear strips welded underneath for durability (see pic# 10).
It has removable bolt-on Side Cutters, and the front cutting edge plate is 50mm thick!
Condition is used but it has had little use. There is some wear on the Tiger Teeth, but almost no wear on the Side Cutters or the side cutting edges. There is some light rust pitting in the bottom.
This is a thick & sturdy, well built bucket, made in Australia by Turners Engineering.
*** Current 90mm Pin Headstock configuration:
90mm Pin Diameter, 585mm Pin Center to Pin Center (CtoC), 422mm Between the inside Ear Bosses (which can be shaved back up to 460mm between the Ear Plates if you need more inside width for your hitch or dipper arm to fit in).
Should fit: JCB JS300 / JS330, Kato HD1430, Link-Belt 4300 QUANTUM, Sumitomo SH300.
Maybe fit: Case 9033 / 9050B / CX330, Caterpillar 235, Daewoo Solar 320 / 330-3, Halla HE280, Kato 1800 / 1220SE2 / 1250SE / HD700SEV / HD900SEV, Kobelco SK290LC / SK330LC / SK350LC, Link-Belt 330LX, Sumitomo SH300-3 / SH300LC-3 / SH330-5 / SH350HD-3 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).
*** If Pin Holes bored out for 100mm Pins, would suit the following machines:
Should fit: Hitachi EX300 / EX310 / EX330 / EX350 / EX355, Hitachi Zaxis 300 / 330 & LC / 350 / 350LC / 350LC-3 / 370, John Deere 350D LC / 370C, Samsung SE350-3 / SE450-3.
Maybe fit: Caterpillar 330B w/E Link / 330C w/E Link / 330C w/Mass Linkage / 345B w/Reach Linkage / 345C w/TB Link / E Family Linkage, Daewoo DX340 LC, Daewoo Solar 330LC-V / 360LC-V, Doosan DX340 / DX350LC-3 / S340LC-V, Halla HE360, Hyundai R320L / R320LC-3 / R360LC / R360LC-3 / R420LC / R450LC-3 / R450LC-7, Kobelco SK450 / SK480, Komatsu PC400 / PC400 Mighty / PC400-3 / PC400-5 / PC400-7 / PC400-8 / PC450, Volvo EC330B / EC360 / EC360B / EC460 / EC460B / MX365LS / SE360LC-3 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).
Shipping dimensions: 830mm Wide, 1750mm Deep, 1445mm High.
Weight: 810kg.
Call if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.