The Perfect MIG Choice For Medium To Heavy Fabrication.
The Weldmatic 356 is the ideal choice for medium fabrication workshops and comes
equipped with Fan-on-Demand™ which will improve efficiency, reduce maintenance and
provide a safer working environment. Packaged with a separate wire feeder it provides extra
flexibility for a workshop set up and enables custom set up to suit the job including arc start,
wire speed, burn back, spot time, creep mode, pre and post gas plus more!
Built with quality components for tough Australian conditions it comes with 3 years warranty,
offering professional welders reliability and performance that’s second to none.
SUITABLE APPLICATIONS
Workshops
Medium to Heavy Fabrication
WELDABLE MATERIALS
Steel
Stainless Steel
Aluminium
PACKAGE INCLUDES
W Roll Drive Wirefeeder
Gas Regulator
Euro Gun Cable (3.6m)
Work Lead (10m)
Interconnecting Leads (10m)
Bernard™ Centerfire™ Tip (0.9mm)
Drive Rollers: 0.9/1.2mm V Groove; 0.9/1.2mm Knurled (Gasless, flux cored)
SPECIFICATIONS
Primary Voltage: 415 VAC-50Hz
Rated Primary Current: 15 Amps
Max Primary Current: 23 Amps
Recommended Generator Power: 16.5 kVa
Supply Plug: 32 Amp
IP Rating: IP21S
Weight: 126kg
Warranty: 3 Years
Standards Compliance: AS60974.1 & AS1674.2 (VRD)
MIG SPECIFICATION
Current Range: 30A/15.5V-355A/31.8V
Rated Output 40°C (10min): 355A/31.8V 40%, 290A/28.5V 60%, 225A/25.3V 100%
Wire Size Range: 0.6-1.6mm (Solid), 0.8-1.6mm (Cored)
Material Thickness Range: Welds up to 12mm+ steel plate, single pass
FEATURES
— 356 A three phase MIG welder
— 355 A at 31.8 V 40% Duty Cycle
— Fan-on-Demand™ Cooling Fan – Reduces noise, energy use and contaminates
— Built-In Thermal Protection – Prevents the machine from operating beyond its safe
thermal zone
— Arc Start - Modifies arc starting condition, wire accelerates at different speed depending on application
— Four geared wire drive - Provides a consistent, smooth, and strong drive for a variety of wires
— Burn Back – Controls how far the wire burns back to the tip on completion of the welding operation
— Spot Timer –Provides short weld times for repetitive spot welds
— Creep Mode – Provides slow wire speed until weld starts - ideal for aluminium starts
— Suitable wires - Gas-shielded and gasless flux-cored wires
— Spool capacity - Takes 5kg and 15kg spools
— IP21S rated
— Generator compatible – 16.5 kVa