NEW Prodcuts, design in the UK
This fixture is used to grind 2, 3, 4, 6 and 12 fluted end mills and shell mills, normally on a surface grinder, using a magnetic table to hold the fixture. It is designed to grind the face only, not the flutes.
Any metric or imperial shank between 2mm and 20mm can be held with a suitable ER32 collet.
Cutters are easily locked in place using the top mounted collet nut with the fixture still stuck to the table (5C sharpening fixture have to be removed from the table since they are locked from underneath with a pin spanner).