Weldmatic 500i Package Includes:
– Interconnecting Lead (10m)
– W65 4 Roll Drive Heavy Duty Wirefeeder
– Euro Gun Cable (3.6m) with Bernard Centerfire 0.9mm Tip
– Work Lead (10m) with Heavy Duty G Clamp
– Industrial Twist Lock Electrode Holder (3m)
– Gas Regulator
– Drive Rollers
– 0.9/1.2 & 1.2/1.6mm V Groove
– 0.9/1.2 & 1.2/1.6mm Knurled
Industrial Multi-Process Welding Solution
This 500 Amp three phase multi-process inverter suits MIG, Stick, Arc Air Gouging and Lift-Arc TIG welding and is ideal for medium to heavy fabrication, and all general industrial fabrication applications.
Variable Arc Control
The package features allow full control of the arc. Infinite voltage control and arc control to adjust arc harshness, and arc start to control the wire starting speed.
VRD
Built in VRD delivers added safety when operating in Stick or Lift-TIG mode and meets the requirements of site work. Fully compliant to Australian Standards AS 60974.1 & AS1674.2 CAT C.
Flexibility & Power
Optimal weld characteristics provide high quality results on steel, stainless steel and aluminium, plus the power to comfortably run all popular sizes of solid and flux cored wires. With the capacity to run 1.6mm flux cored wire, the 500i can handle a wide range of applications.
Built-In Operator Safety
The power source features a built-in thermal protection device that will cut in if the machine is operated beyond its safe thermal operating zone.
Digital Meters
Digital Volt and Amp meters retain last weld information and allow precise set-up.
Gas or Gasless
Suits gas shielded and flux cored wires.
Comes with a 32 Amp Supply Plug
Spool Capacity
5kg & 15kg
3 Year Gold Shield Warranty
Every Weldmatic machine is backed by WIA’s industry leading ‘Gold Shield 3 Year Warranty’, covering parts and labour, and supported by an Australia wide service network. You can be guaranteed you’re buying reliability and performance. For details, refer to the Weldmatic warranty statement.
Generators*
Generators used to power this equipment must have a minimum capacity of 25kW continuous.
Due to variation between generators by different manufacturers, it is impossible for WIA to validate operation from all generators. Therefore, WIA recommend that operation of equipment on the generator is confirmed before purchasing either welder or the generator.
Specifications:
– Primary Voltage: 380/415 Vac – 50/60 Hz 3 Phase
– Rated Primary Current: 28.7 Amps
– Max. Primary Current: 37 Amps
– Recommended Generator kVa: 25 kVA
– Rated Output 40C (10min)
– Stick MMA
– 490 Amps 39.6 Volts 60% Duty Cycle
– 387 Amps 33.4 Volts 100% Duty Cycle
– TIG
– 500 Amps 60 Volts, 60% Duty Cycle
– 387 Amps 25.5 Volts, 100% Duty Cycle
– MIG
– 500 Amps 39 Volts, 60% Duty Cycle
– 387 Amps 33.4 Volts, 100% Duty Cycle
– Welding Current Range: 37 – 500 Amps
– Wire Size Range (mm):
– Carbon Arc Air Max. 8mm
– 0.9-1.6 solid
– 0.9-1.6 cored
– Shipping Weight: 138kg