15-32 ton (80mm pin) 1550mm wide Excavator Pallet Forks with 4.7 ton Tynes

Used 1550mm wide Excavator Pallet Forks suit 15-32 Ton machines.

The condition is used but is in great shape. There are a few mild dings and bangs, but otherwise is a good solid and well engineered set of pallet forks.

The tynes as pictured are not fully extended apart and can be moved right to the edges to utilise the full 1550mm width for wider pallets and loads.

*** Fitted with USA made MSI Mechforge P226A fork tynes:
* Tyne Width: 125mm.
* Tyne Thickness: 50mm tapering down to 5mm at the tip.
* Tyne Length: 1125mm (actual carry length not including the 50mm thick vertical section).
* Tyne Rating per Pair: 4,762kg (10,500lbs) 600mm (24”) load center.


*** Current Headstock configuration:
* Pins: 80mm
* Pin Center to Pin Center (CtoC): 449mm
* Between the Ears (BTE): 318mm Between the inside Ear Bosses (which can be shaved back up to 482mm between the Ear Plates if you need more inside width for your hitch or dipper arm to fit in).
*
* Should fit: Case 9021 / CX210 / CX210B / CX225SR, Caterpillar 318B L / 320 / 320B w/B Link / 320D w/B Link / 321 / 322B w/B Link / 322C w/B Link / 324D w/Reach Linkage / 330C / 330D w/Long Linkage / B Family Linkage, Daewoo Solar 170LC-V / 170W-3 / 175LC-V / 200W-3 / 200W-V / 220LC-V / 225LC-V / 225NLC-V / 225SLR / 250LC-V / 255LC-V, Doosan DX180LC / DX180LC-3 / DX180W-3 / DX190W / DX210W / DX225 / DX225LC-3 / S175LC-V / S180W-V / S210W-V / S225LC-V / S255LC-V / S470LC-V, Hyundai R210LC-7, JCB JS200 / JS200LC / JS210 / JS220 / JS220LC / JS235, Kobelco 200SRLC / SK200 / SK210LC / SK210LC-VI, Komatsu PC200 / PC200 Mighty / PC200-3 / PC200-5 / PC200-6 / PC200-7 / PC200LC-8 / PC210 / PC210-6 / PC220-3 / PC220-5 / PC220LC-6 / PC220LC-7 / PC220LC-8 / PC240 / PC250-6 / PC270 / PC270LC-6 / PC270LC-7 / PC280 / PW210, Link-Belt 210LX / 225SA / 2800 QUANTUM, New Holland EH215LC, Sumitomo SH200 / SH200-2 / SH200-3 / SH200LC / SH200LC-3 / SH210-5 / SH215U-1 / SH215X-1 / SH225X-3.
*
* Maybe fit: Case CX160, Caterpillar 320 / 320B w/C Link / 320C w/C Link / 321 w/Mass Linkage / 322C w/Reach Linkage / 325B w/C Link / 325C w/C Link / 325C w/Reach Linkage / E300 Series / C Family Linkage, Doosan DX255 / DX255LC-3, Halla HE280, Hitachi EX200 / EX215 / FH200 / FH215, Hitachi Zaxis 200 / 200 & LC / 210 / 225US LC / 225USR, JCB JS150LC / JS160 / JS160LC / JS180, John Deere 200C LC / 200D LC / 225C LC RTS, Kobelco SK210 / SK235SR, Liebherr 912 / 912 LITRONIC / 922 LITRONIC, Link-Belt 160LX / 160X2 / 2700 QUANTUM, LiuGong 922 / 925, Samsung SE210 Early Series / SE210-3 / SE210LC-2 / SE210LC-3, Sumitomo SH150 / SH160, Terex TXC 175LC / TXC 180LC / TXC 225LC / TXC 255LC, Volvo EC210 / EC210B / EC210C / ECR235C / EW230C / MX225LS / SE210LC-3 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).


Dimensions: 1553mm Wide (at the carriage), 1988mm Deep (tip of fork tyne to back of headstock), 1046mm High. Weight: 650kg.


Call if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.