2012 Caterpillar D6N XL

2012 Caterpillar D6N XL Dozer RARE SU Blade ONLY 3,300 Hours Since New Mine Spec Sweeps, Rear Screen & MS Ripper Non-DPF / Non-AdBlue

Make: Caterpillar | Model: D6N XL | Year: 2012 | Hours: 3,300 | Power: 145HP | Blade: SU | Spec: Mine

A genuinely hard-to-find 2012 Caterpillar D6N XL dozer fitted with the rare SU (Semi-Universal) blade and showing only 3,300 hours since new. Most D6Ns come with a 6-way VPAT blade; an SU-blade D6N is a rare find, giving you real production-dozing capacity in a mid-size, easy-to-float machine. Built to mine spec and powered by the proven Cat C6.6 ACERT engine (145HP) in the non-DPF / non-AdBlue configuration, with differential steering for full-power turns. Fitted with sweeps, a rear screen and an MS multi-shank ripper, sitting on a very good undercarriage. Comes with a fresh 250-hour service and comprehensive workshop report through our brand-new purpose-built facility on the Sunshine Coast QLD. Ready to earn from day one.

Rare SU Blade why it matters: The SU (Semi-Universal) blade combines the material-carrying capacity of a universal blade with the penetration and pushing power of a straight blade the production operators choice for moving serious volume. Its rarely seen on a D6N, which makes this machine ideal for bulk earthworks, stockpile work, dam building and land clearing where a VPAT blade just cant carry the same load.

Only 3,300 Hours Since New exceptionally low: For a 2012 D6N, 3,300 hours is exceptionally low barely run in by dozer standards. Combined with a very good undercarriage, the next owner gets years of productive life with minimal wear on the engine, drivetrain and running gear.

Mine Spec + Non-DPF / Non-AdBlue built for hard work: Mine-spec machines are set up with additional safety and visibility fit-out for demanding sites. Paired with the non-DPF, non-AdBlue configuration no particulate filter, no regens, no DEF to buy or store, fewer emissions-system electronics to fail its a simple, reliable machine for remote, mining and heavy-duty work where uptime matters most.

Best Features:

RARE SU (Semi-Universal) blade big loads, strong penetration, high-volume dozing; seldom found on a D6N

ONLY 3,300 HOURS SINCE NEW exceptionally low for a 2012; years of productive life ahead

Very good undercarriage plenty of wear life remaining before the next UC spend

Mine spec set up for demanding sites with added safety and visibility fit-out

NON-DPF / NON-ADBLUE no regens, no filter blockages, no DEF; simpler, more reliable

Sweeps and rear screen fitted ready for forestry, scrub and land-clearing work

MS multi-shank ripper for tearing into hard ground, rock and roots

Cat C6.6 ACERT turbo diesel 145HP net; proven, efficient, reliable Cat power

Differential steering full power to both tracks through the turn with a loaded blade

Lock-up clutch torque converter productive, efficient power delivery to the ground

XL undercarriage configuration ideal balance of flotation, stability and ground pressure

Fully enclosed EROPS cab with A/C climate controlled, dust sealed, full-day comfort

Full Specifications:

Year: 2012

Hours: 3,300 since new

Make / Model: Caterpillar D6N XL

Engine: Cat C6.6 ACERT turbo diesel

Power: 145 HP net (108 kW)

Emissions: Non-DPF / Non-AdBlue configuration

Transmission: Powershift with lock-up clutch torque converter

Steering: Differential steering

Blade: SU (Semi-Universal)

Ripper: MS multi-shank ripper

Protection: Sweeps and rear screen fitted

Undercarriage: XL configuration, very good condition

Spec: Mine spec

Cab: Fully enclosed EROPS, A/C

Included with Purchase:

SU blade, MS ripper, sweeps and rear screen fitted

Fresh 250-hour service completed prior to delivery

Comprehensive workshop inspection report

All work carried out in our brand-new purpose-built workshop on the Sunshine Coast, QLD

Ready to work all systems checked and operational

Australia-wide transport can be arranged

Finance options available

Ideal for: Civil contractors & bulk earthworks Mining & remote site work Stockpile & quarry work Dam and pad building Forestry & land clearing Agricultural & station properties Owner-operators wanting a rare SU-blade, low-hour, mine-spec D6N with no emissions-system hassle

Inspections welcome workshop, Sunshine Coast, QLD. Contact Daz Scale on or to book a look.

PRICE: $307,890 including GST

Drive-away pricing available on request. Transport & finance can be arranged Australia-wide.
2012 Caterpillar D6N XL Dozer RARE SU Blade ONLY 3,300 Hours Since New Mine Spec Sweeps, Rear Screen & MS Ripper Non-DPF / Non-AdBlue

Make: Caterpillar | Model: D6N XL | Year: 2012 | Hours: 3,300 | Power: 145HP | Blade: SU | Spec: Mine

A genuinely hard-to-find 2012 Caterpillar D6N XL dozer fitted with the rare SU (Semi-Universal) blade and showing only 3,300 hours since new. Most D6Ns come with a 6-way VPAT blade; an SU-blade D6N is a rare find, giving you real production-dozing capacity in a mid-size, easy-to-float machine. Built to mine spec and powered by the proven Cat C6.6 ACERT engine (145HP) in the non-DPF / non-AdBlue configuration, with differential steering for full-power turns. Fitted with sweeps, a rear screen and an MS multi-shank ripper, sitting on a very good undercarriage. Comes with a fresh 250-hour service and comprehensive workshop report through our brand-new purpose-built facility on the Sunshine Coast QLD. Ready to earn from day one.

PRICE: $307,890 including GST