2026 JCB 540-180 HI VIS

Brand New 2026 JCB 540-180 Hi-Viz Loadall Telehandler 4,000kg Lift Capacity 18m Lift Height Pallet Forks & Genuine GP Bucket Included Stage V No DEF/AdBlue

Make: JCB | Model: 540-180 Hi-Viz Loadall | Year: 2026 (Brand New) | Lift Capacity: 4,000kg | Lift Height: 18m | Engine: 75HP JCB Stage V

A brand new 2026 JCB 540-180 Hi-Viz Loadall telehandler from the worlds number one telehandler manufacturer. This is a serious high-reach machine, boasting an impressive 4,000kg lift capacity and 18-metre lift height with up to 10.47m of forward reach ideal for construction, steel erection, roofing, block-and-brick, agriculture and hire fleets. Powered by the efficient 75HP JCB DieselMAX Stage V engine that achieves emissions compliance without needing DEF/AdBlue injection, keeping servicing simple. The clever 4-piece proportional boom extends and retracts smoothly in one movement, while JCBs SMART regenerative hydraulics cut cycle times by up to 20% and fuel use by 4.4%. The Hi-Viz cab with low boom pivot delivers class-leading all-round visibility and safety. Supplied with pallet forks AND a genuine JCB GP (general purpose) bucket so you can lift, carry and load from day one. Prepared and pre-delivered through our brand-new purpose-built facility on the Sunshine Coast QLD. In stock and ready to work.

Brand New and priced to move this month: This is a brand new, unused 2026 machine not an ex-hire or used unit. You get the full JCB build quality, the latest Stage V driveline, and JCBs legendary best-in-class resale value. And for this month only, weve sharpened the price well below the advertised figure (see below) a genuine opportunity to get into a new JCB Loadall at a serious saving.

Best Features:

BRAND NEW 2026 machine unused, full build quality, latest Stage V driveline

PALLET FORKS + GENUINE JCB GP BUCKET INCLUDED lift and carry pallets, plus load and dig with the general-purpose bucket; ready to work two ways from day one

4,000kg lift capacity serious payload for construction, steel and materials handling

18m lift height class-leading reach; get to heights other telehandlers cant

10.47m maximum forward reach place loads far forward with confidence

75HP JCB DieselMAX Stage V engine efficient, responsive at low revs; NO DEF/AdBlue required

4-piece proportional boom hydraulic ram + chains extend/retract all sections in one fast, smooth movement

SMART regenerative hydraulics cuts cycle times up to 20% and fuel use by 4.4%

Hi-Viz cab with low boom pivot class-leading all-around visibility for safety and productivity

Adaptive Load Control smooth, progressive boom extension for safe load retention

Hose-burst check valves (HBCVs) protect the operator and rams in the event of hose failure

10% tighter turning circle & 1,000kg lighter than the 540-170 exceptionally manoeuvrable

JCB LiveLink telematics ready fleet management, tracking and uptime monitoring

Best-in-class resale value JCB Loadalls hold their value better than any other telehandler

Full Specifications:

Year: 2026 (Brand New)

Make / Model: JCB 540-180 Hi-Viz Loadall

Lift capacity: 4,000 kg

Lift height: 18 m (17.51 m)

Max forward reach: 10.47 m

Engine: JCB DieselMAX, Stage V

Power: 55 kW (75 HP)

Emissions: Stage V DPF/DOC, NO DEF/AdBlue required

Boom: 4-piece proportional (ram + chains)

Hydraulics: SMART regenerative

Cab: Hi-Viz, A/C, low boom pivot

Safety: Adaptive Load Control, hose-burst check valves

Transmission: JCB powershift, 4WD

Attachments included: Pallet forks + genuine JCB GP bucket

Hitch: JCB Q-fit quickhitch

Telematics: JCB LiveLink ready

Ideal for: Construction & building sites Steel erection & structural work Roofing & cladding Block, brick & materials handling Agriculture & large properties Hire fleets Any job needing serious lift height and payload with best-in-class visibility and safety

Advertised at $219,890 including GST

THIS MONTH'S SPECIAL $204,490 including GST

SAVE OVER $15,000 LIMITED TIME

IN STOCK NOW Inspections welcome at workshop, Sunshine Coast, QLD. Contact Daz Scale on or to book a look. Includes pallet forks & genuine GP bucket.

This month's special price transport & finance can be arranged Australia-wide.
Brand New 2026 JCB 540-180 Hi-Viz Loadall Telehandler 4,000kg Lift Capacity 18m Lift Height Pallet Forks & Genuine GP Bucket Included Stage V No DEF/AdBlue

Make: JCB | Model: 540-180 Hi-Viz Loadall | Year: 2026 (Brand New) | Lift Capacity: 4,000kg | Lift Height: 18m | Engine: 75HP JCB Stage V

A brand new 2026 JCB 540-180 Hi-Viz Loadall telehandler from the worlds number one telehandler manufacturer. This is a serious high-reach machine, boasting an impressive 4,000kg lift capacity and 18-metre lift height with up to 10.47m of forward reach ideal for construction, steel erection, roofing, block-and-brick, agriculture and hire fleets. Powered by the efficient 75HP JCB DieselMAX Stage V engine that achieves emissions compliance without needing DEF/AdBlue injection, keeping servicing simple. The clever 4-piece proportional boom extends and retracts smoothly in one movement, while JCBs SMART regenerative hydraulics cut cycle times by up to 20% and fuel use by 4.4%. The Hi-Viz cab with low boom pivot delivers class-leading all-round visibility and safety. Supplied with pallet forks AND a genuine JCB GP (general purpose) bucket so you can lift, carry and load from day one. Prepared and pre-delivered through our brand-new purpose-built facility on the Sunshine Coast QLD. In stock and ready to work.