2026 Makin Traks Stick Rake

BUILT HEAVY, PRICED RIGHT

A stick rake built to take real clearing work not a light-duty rake that bends on the first stump.

Our new Heavy Duty Stick Rake is designed and built for D3 to D6 size dozers doing land clearing, stick raking, windrowing and site cleanup. The main beam is 200mm x 200mm box section with 18mm wall, and the 12 tynes are Bisalloy 450 wear plate, 400mm long high-hardness, abrasion-resistant steel that holds its shape and resists wear far better than mild steel. It rakes timber, roots and rock out of the soil and leaves the dirt behind, so you clean up a site in a fraction of the time and keep your topsoil where it belongs.

TWO SIZES, ONE KIT

STANDARD RAKE 3.4m

$9,350 including GST

3.4m working width, 12 tynes

200 x 200mm box beam, 18mm wall

Bisalloy 450 tynes, 400mm long

Complete kit, ready to fit

Approx. 900kg

Suits D3 to D6 size dozers

WITH EXTENSIONS up to 4.0m

$10,450 including GST

Standard 3.4m rake PLUS

1 fold-out tyne extension each side (14 tynes)

Folds out to 4.0m working width

Fold in for transport and tight work

Approx. 1,050kg

Suits D3 to D6 size dozers

The extension option adds just $1,000 for an extra 600mm of raking width more ground covered on every pass.

WHO IT PAYS FOR

Property owners turn rough land into real value. Clearing, stick raking and windrowing is a capital improvement. Timber, regrowth and rock come out, the topsoil stays put, and paddocks that were unusable become country you can graze, crop, build on or sell. Cleared, usable land is worth more than rough land, and a rake lets you do that work properly with the dozer you already own adding maximum value to your property without paying a contractor to do it.

Contractors more work and a better hourly rate. A dozer with a stick rake is a land-clearing machine, not just a push machine. Raking work typically commands a higher hourly rate than straight dozing, and plenty of clearing, windrowing and site-prep jobs simply wont be awarded to a dozer that turns up without a rake. Fit one and you open the door to contracts you cant quote on today and the rake can pay for itself on the jobs it wins you.

WHY THIS RAKE

200 x 200mm box section, 18mm wall a seriously stiff main beam that wont twist or fold under load

Bisalloy 450 tynes high-hardness, abrasion-resistant steel that keeps its points and resists wear

12 x 400mm long tynes deep enough to pull roots and rock out of the ground, not just skim the surface

Fold-out extension option to 4.0m wider when youre clearing, narrower for transport and tight sites

Suits D3 to D6 size dozers one design across the most popular dozer classes

Complete kit arrives ready to fit; no chasing parts

Keeps your topsoil rakes out timber and rock while letting soil fall through, unlike pushing with the blade

Designed by a dozer dealer we sell and work on these machines every day, and built this rake for how theyre actually used

FITTING

This is a complete kit. The only work required is a small amount of fabrication on the back of your blade to weld on the mounting bosses the rake attaches to. Any competent fabricator can do it, or talk to us about having it done.

SPECIFICATIONS

Suits: D3 to D6 size dozers

Main Beam: 200mm x 200mm box section, 18mm wall

Tynes: 12 (standard) or 14 (with extensions), Bisalloy 450, 400mm long

Standard Width: 3.4m

Extended Width: 4.0m (1 fold-out tyne extension each side)

Weight: Approx. 900kg (12 tyne) | approx. 1,050kg (14 tyne)

Supplied As: Complete kit

Fitting Required: Mounting bosses fabricated onto rear of blade

Price: $9,350 including GST standard | 10,450 including GST with extensions

Ideal for: Land clearing & stick raking Windrowing Site cleanup & rock picking Rural & station properties Firebreaks Contractors running D3, D4, D5 and D6 size dozers

Order now or come and see one , Sunshine Coast, QLD. Contact Daz Scale on or

Tell us your dozer make and model and well confirm fitment.

STANDARD 3.4m: $9,350 including GST | WITH EXTENSIONS (4.0m): $10,450 including GST

Freight can be arranged Australia-wide.
BUILT HEAVY, PRICED RIGHT

A stick rake built to take real clearing work not a light-duty rake that bends on the first stump.

Our new Heavy Duty Stick Rake is designed and built for D3 to D6 size dozers doing land clearing, stick raking, windrowing and site cleanup. The main beam is 200mm x 200mm box section with 18mm wall, and the 12 tynes are Bisalloy 450 wear plate, 400mm long high-hardness, abrasion-resistant steel that holds its shape and resists wear far better than mild steel. It rakes timber, roots and rock out of the soil and leaves the dirt behind, so you clean up a site in a fraction of the time and keep your topsoil where it belongs.

STANDARD 3.4m: $9,350 including GST | WITH EXTENSIONS (4.0m): $10,450 including GST