ALFA by Tulip 14m³ Single Auger Feed Mixer Wagon

Bring capacity, consistent mixing and practical feed weighing to your daily feeding routine with the ALFA by Tulip 14m³ Feed Mixer Wagon. Its heavy-duty single vertical auger combines large and small cutting knives for fast, consistent mixing of feed materials, while Digi Star scales help you track feed quantities from the tractor-mounted monitor.

The auger features eight large and eight small knives, supported by two counter interrupter knives. High auger flighting and an anti-spill ring help contain material during mixing. A single-speed planetary gearbox drives the auger at 27 rpm.

Built with a 20 mm steel base, 8 mm walls and 15 mm auger flighting, the mixer sits on an independent chassis with a single heavy-duty axle. Wide flotation tyres provide stability and smooth travel across uneven ground, while the swivel tow eye and adjustable drawbar height support practical tractor connection.

A viewing platform, mineral adding chute, heavy-duty jack and LED lighting for road use and night work make the wagon well equipped for everyday operation. Minimum tractor power requirement is 110 hp.

STANDARD FEATURES
- 14m³ mixing capacity
- Single vertical auger with high flighting
- Digi Star (USA) scales with tractor-mounted monitor
- Anti-spill ring
- Independent chassis and single heavy-duty axle
- Wide flotation tyres
- Swivel tow eye and adjustable drawbar height
- Wide-angle PTO drive shaft
- Gearbox oiler reservoir
- Viewing platform and mineral adding chute
- Heavy-duty jack
- LED lighting for road use and night work
- Right-centre door position

SPECIFICATIONS
- Minimum tractor power: 110 hp
- Number of augers: 1
- Number of axles: 1
- Tyres: 445/45 R19.5 flotation industrial tread
- Base steel thickness: 20 mm
- Wall steel thickness: 8 mm
- Auger flighting thickness: 15 mm
- PTO input: 540 (as specified in brochure)
- Gearbox: single-speed planetary
- Auger speed: 27 rpm
- Large auger knives: 8
- Small auger knives: 8
- Counter interrupter knives: 2
- Dimensions (L x W x H): 4,780 x 2,480 x 2,930 mm
- Tare weight: 4,950 kg
- Structural and gearbox warranty: 2 years

AVAILABLE OPTIONS
Configure the mixer to suit your feeding setup with:
- 1,200 mm hinged elevator
- 3,000 mm hinged elevator
- Unloading chute where no elevator is fitted
- Custom door position
- Bidirectional front cross conveyor
- Stationary mounting

Contact Equipment Specialists in Toowoomba for pricing, availability and help selecting the right configuration for your operation.