ASSET-1640TR - New EURO Model Toolroom Quality Heavy Weight 1600Kg 2 Axis DRO

## LIMITED TIME FREE 9 PIECE 20MM CARBIDE TOOL KIT & 4MT LIVE CENTRE - VALUED OVER $250+GST & LED WORK LIGHT & EUROPEAN HAAS TYPE FULLY UNIVERSAL QUICK CHANGE TOOL POST AND HOLDERS FITTED###
Introducing our ASSET 1640TR Precision Geared Head Toolroom Lathe with Easson 2 Axis DRO.

Key Features:
Big 52mm Spindle Bore With Threaded Rear Spindle.
Triple Precision Headstock Bearings
1000 Distance Between Centres.
410mm Swing Over Bed
580mm Swing In Gap
255mm Swing Over Cross Slide
speeds(16)-45/70/90/108/140/165/215/255/330/385/510/585/770/900/1170/1900
210mm - cross slide travel
140mm - top slide travel
120mm - tailstock travel
55mm - tailstock diameter
250mm - bed width
20/25mm Tools to suit
B Series Tool Holders
Power Saddle & Cross Feed.
Solid cast Iron Base For Increased Rigidity.
Safety Interlock Foot Brake, Chuck Guard & Headstock Cover.
Sino 2 Axis DRO System Fitted.
Quick Change Tool Post Fitted With 3 x Holders.
Cam Lock Chuck System
250mm x 3 Jaw & 250mm x 4 Jaw Chucks & Faceplate
Wide Variety Metric, Imperial & Other Thread Cutting Ranges
Covered Lead screw For Extra Safety
Suits 20mm Cutting Tools.
Volt Operation.
Shipping Dimensions: 1920mm x 720mm x 1450mm x 1600Kg

#######################################
Machines Can Be Demonstrated Under Power at 8 Capital Drive Dandenong, Vic.
Or See Videos or online
Otherwise call Us On And We Can Discuss Youe Requirement
Asset Offer Full Sales Service, Parts & Accessories For Your Support!!!
#######################################

We also offer a wide range of lathes, mills, drills and engineering machine tools for sale. Below are a sample of our Lathes available.

Steelmaster Metal and Precision Lathe Machines
When looking for a quality Engineering Metalworking Lathe, look no further than Steelmaster Industrial. Steelmaster Industrial Engineering Metalworking Lathes offer the machinist a very high-quality machine with superb features and tight tolerances at reasonable prices. Steelmaster carries over 20 models of metal fabrication Engineering Metalworking Lathes in stock at all times for quick shipments. Steelmaster Industrial's ever-growing line of Engineering Metalworking Lathes consists of machines with round capacities starting at 210mm up to 1600mm swing over the bed in lengths from 400mm up to 12000mm. Depending on your needs we have the lathe for you, starting with our cost effective Engineering Metalworking Lathes to our combination lathes.

Metal lathes
Depending on your needs, Steelmaster has a great line of cost-effective gear head metal lathes. With four models to choose from these models give the best ``bang for the buck`` of any of the Steelmaster lathes. These metal lathes come standard with many of the features that are most important. Each lathe comes standard with a stand, work light, three and four jaw chucks, coolant system (SM-1340 & Up), steady rest, and follow rest. Quick change tool post, covered lead screws, safety guards and interlocks are also all included. There is even an DRO systems fitted to most models.

Precision Lathes
Each precision metal lathe comes fully guarded with halogen lights, a three & four jaw chuck, and steady and follow rests. The castings on these tool room lathes are Meehanite® castings with hardened and ground ways coated with Turcite-B® for long wear life and tighter turning tolerances. Quick change tool post, covered lead screws, safety guards and interlocks are also all included. Spindle bore sizes range up to 80mm and are threaded as to enable rear spider attachment for long length turning. Each precision lathe comes standard with a factory installed Easson DRO (digital read out).

Big Bore Lathes
Big bore lathes are also offered on our Steelmaster lathes from 105mm up to 380mm on request. Each big bore metal lathe comes fully guarded with halogen lights, a three & four jaw chuck, and steady and follow rests. Rapid saddle power drive is normally also standard on these.

Combination Lathes
Steelmaster Industrial also offers Combination Lathe, Mill, and Drill Machines perfect for the garage shop or for any one who is working on prototypes or small projects. For More information on any of these metal lathes, click on the links above or contact a Steelmaster industrial Rep


MAKE YOUR NEXT PURCHASE AN ``ASSET`` TO YOUR COMPANY!
Please contact us for more information.

Asset Plant & Machinery - Steelmaster Machinery
118 Logis Boulevard Dandenong South VIC 3175