Arburg Industrial Hydraulic Power Unit Siemens 22kW Motor, Bosch and Arburg Valves

Arburg Industrial Hydraulic Power Unit
Siemens 22kW Motor, Bosch and Arburg Valves

Large industrial hydraulic power unit understood to have been removed from an Arburg injection-moulding system.

The assembly includes a large hydraulic reservoir, Siemens 22kW electric motor, hydraulic pump, Bosch control block, multiple Arburg directional valves, KME Schmöle oil cooler/heat exchanger, pressure gauge, hydraulic hoses and associated components.

This may be suitable for an Arburg machinery operator, hydraulic-equipment repairer, injection-moulding business or buyer seeking parts for refurbishment or reuse.

Main features
Arburg industrial hydraulic assembly
Siemens 22kW three-phase motor
Hydraulic pump assembly
Bosch hydraulic control block
Multiple Arburg solenoid directional valves
KME Schmöle oil cooler / heat exchanger
Pressure gauge
Large steel hydraulic reservoir
Hoses, wiring and fittings as pictured
Siemens motor details
Power: 22kW
Frequency: 50Hz
Voltage: 400/690V ?/Y
Current: approximately 41/24A
Speed: approximately 1430 rpm
Mounting: IM B5
Approximate motor weight: 139kg

The motor plate is worn and partially obscured. Prospective buyers should examine the photographs and verify all motor details before purchase.

Bosch hydraulic component
Brand: Bosch
Part number: 114
Maximum pressure: 210 bar
Made in Germany
Arburg hydraulic valves

Several Arburg-branded valves are fitted. Visible identification includes:

163787 – WE10DB 43C 0240-60
163782 – WE10DA 08A 0240-60
153753 – WE06DA 04C 0240-60

Additional valves and components are included exactly as photographed.

KME Schmöle heat exchanger
Type: G8-02.21-1
Manufacturer number: 1081949
Year: 2001
Serial number: 89569
Shell side maximum pressure: 5.4 bar
Tube side maximum pressure: 15 bar
Maximum temperature: 90°C
Approximate size and weight
Length: 1900mm
Width: 1300mm
Height: 1100mm
Weight: 770kg

Measurements are taken from the storage label and should be regarded as approximate.

Condition

Used industrial equipment.

The unit has not been powered or operationally tested by us. Its operating history, internal condition and reason for removal are unknown.

It has general dirt, oil residue, surface corrosion and storage wear. Some hydraulic hoses and electrical cables are loose, disconnected or cut. The condition and level of any remaining hydraulic oil are unknown.

The assembly is being sold complete as photographed for:

Inspection
Refurbishment
Parts
Machinery repair
Hydraulic-system reuse

No warranty is given regarding the motor, pump, valves, cooler, seals, electrical components or compatibility with a particular machine.


To heavy to post but we are happy to assist with arranging freight and will strap to a pallet at no charge.



Contact and inspection of goods
Please contact Tim Marshman with any questions. This item may be inspected by appointment at 9 Vernon Smith Court, Ottoway, South Australia