CENTAURO SUPER CUT 80 Thin cutting band resaw

MADE IN ITALY SUPERCUT 80 Special thin cutting Precision Band re-saw.
The great advantages of a compact and versatile machine for all thin cutting solutions:
high finishing, high precision and minimum kerf:

- Thin layer from 2 mm thickness
- Maximum cutting accuracy up to ± 0.15 mm
- Minimal kerf, cutting thickness from 1.3 mm
- Ideal for the cutting of dried and wet wood or alternative materials
- Surface of the thin layer ready for gluing without need of further processing steps
- Friendly user electronic control
- Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life
- Optical sensor to start cutting cycle and speed change
- Ground table
- “Flexam” belt feeding for the best performance
- 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during
feeding and cutting.
- Oleo-pneumatic tensioning of the blade for better cutting performance
- Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting
- Internal/external lubrication of the blade to remove residues of resins and chips
- 4 dust extraction to optimize the suction of dust and chips
- Cutting height of 400 mm (500 mm optional)
- Cutting width up to 400 mm
- High quality powerful motor kW 15 (HP 20)
- Ethernet connection for on line service

* Steel frame
* Friction rack-pinion and telescopic blade guard
* Motor Power kW 15 (HP 20)
* Infeed idle rollers with front emergency cable
* Pneumatic wheels braking
* Fixed steel table, 1290x800 mm
* Top blade guide with wooden inserts
* CHACO blade guide on the table
* Automatic star-delta starter
* Front and rear emergency stop
* Internal and external lubrication of the blade
* Automatic hydraulic sawblade tensioning
* Safety micro-switch to doors
* Sawblade tension indicator
* Stellite sawblade ready for use 5500x54x0,9 mm; pitch 20
* Front and rear emergency button

* RTT Feeder:
* Optical sensor
* Motor Power kW 0,37 (0,5 HP)
* Idle rollers diam. 160 mm
* Variable feed rate 0-30 mt/min
* Max. rollers-blade clearance 200 mm
* Height of feeding carpet 300 mm
* Max. fence-blade clearance 200 mm
* Length of carpet fence 750 mm
* Electronic control