DASHIN CHAMPION 2500 Centre Lathe

We have an ex-education department Dashin Champion 2500VS Centre Lathe for sale.



Stock # 4688

This is a Taiwanese-built variable speed centre lathe, manufactured by Jesco. This example is fitted with a Carmar SW4000 two-axis digital readout, quick change toolpost, and the standard variable speed control system with constant surface speed (CSS) function, allowing the spindle to hold a consistent cutting speed as diameter changes during facing or taper work.

This used unit has come into Newmac in good working order and includes both the standard 3-jaw and 4-jaw chucks, fixed & travelling steadies

Specifications
Swing over bed: 390mm
Swing in gap: 610mm
Swing over cross-slide: 240mm
Distance between centres: 1250mm
Spindle bore: 55mm
Centre height: 190mm
Bed width: 270mm
Spindle nose: D1-6
Headstock spindle taper: MT6
Tailstock taper: MT4
Cross slide travel: 230mm
Compound slide travel: 120mm
Leadscrew type: metric
Metric cross feed: 0.02 – 0.5mm/rev
Metric longitudinal feed: 0.040 – 1.00mm/rev
Metric thread pitch range: 39 steps, 0.2 – 14mm
Imperial thread range: 45 steps, 2 – 72 TPI
Spindle speed: variable, 18 – 2500rpm (high/low range selector)
Motor power: 5.5kW / 7.5hp
Voltage: 415V
Nett weight: 1500kg (approx.)

Included with this machine
3-jaw and 4-jaw chucks
Quick change toolpost
Fixed & travelling steadies
Digital readout (Carmar SW4000)
Coolant system
Work light

Freight options
We are happy to provide freight quotes with a full delivery address

We recommend customers pay us a visit to inspect machinery, where we are happy to test run machinery in our warehouse, that way it gives you peace of mind that the machine will do your job before purchase.

This lathe machine is in our warehouse so please feel free to call us on for more information & price or pop in to inspect the machine at your convenience.

We are always interested in purchasing metalworking machinery & surplus equipment. Should you be looking at Downsizing, Relocating, Closing Down or having machinery surplus to requirements, we would appreciate the opportunity to assist in any way we can.

We would like to extend a note to all prospective customers. We are happy to provide details of freight companies that transport machines anywhere in Australia or worldwide. However, we want to remind customers that the machines are not insured during transport by either the transport companies or Newmac Equipment. We strongly advise that customers speak with their usual insurance company to take out transport insurance.

3 Phase Power — Please Note
This machine does not include a plug. When 3 phase machinery is decommissioned from industrial use, it is typically disconnected from a switchboard by an electrician — meaning no plug is fitted, and in some cases the cable may also be absent.

As a machinery dealer, we are not electricians and are unable to supply or fit plugs. Buyers will need to arrange connection through a licensed electrician. This is no different to purchasing new 3-phase machinery, which also requires a licensed electrician for installation.

On occasion, a machine will arrive with a plug already fitted — in that case, it stays. For the same reason we don’t fit plugs, we don’t remove them either.