Deton KTF1000-II 75kW Industrial Centrifugal Fan 71,464m³/h Ventilation Air HVAC

New Deton KTF1000-II 75kW Industrial Centrifugal Fan – 71,464m³/h
New surplus Deton KTF1000-II industrial centrifugal fan, complete with a 75kW Qin Wei three-phase induction motor, large galvanised scroll housing, backward-curved impeller and fabricated mounting base.

This is a very large, high-volume industrial fan designed for process ventilation, dust extraction, drying, cooling, air handling and other applications requiring substantial airflow against system resistance.

The fan was manufactured in December 2024 and is unused. It has been stored and handled, so minor water marks, scratches, surface marks and light fastener oxidation are visible.

Fan Specifications
Manufacturer: Guangdong Zhaoqing Deton Co., Ltd
Brand: Deton
Model: KTF1000-II
Equipment type: Industrial centrifugal fan / blower
Drive arrangement: Arrangement A, direct drive
Discharge orientation: Right 90°
Rated airflow: 71,464 m³/h
Rated airflow: Approximately 19.85 m³/s
Rated total pressure: 2,306 Pa
Fan speed: 1,480 rpm
Motor power: 75 kW / 100 hp
Electrical supply: 415 V, 50 Hz, three phase
Product number: 11L24351
Applicable standard: JB/T 10563
Fan manufacture date: 25 December 2024
Country of manufacture: China

Deton is a Chinese industrial fan manufacturer, and its listed product range includes large centrifugal fans for commercial and industrial ventilation applications. The company also has several centrifugal fan ranges listed through the Air Movement and Control Association.

Motor Specifications
Manufacturer: Qin Wei Electric Corporation
Motor type: AEH3 2A-04, as the plate appears to read
Motor frame: 280S
Motor output: 75 kW / 100 hp
Motor type: Three-phase high-efficiency induction motor
Poles: 4
Rated speed: 1,485 rpm
Voltage: 415/720 V
Rated current: 127.9/73.7 A
Frequency: 50 Hz
Efficiency: 95.0%
Protection rating: IP55
Insulation class: Class F
Duty: Continuous
Bearings: 6316 ZZ, both ends
Motor weight: 559 kg
Motor manufacture date: December 2024
Serial number: 0D2002

Connections and Measurements
Circular fan inlet diameter: Approximately 1,000 mm
PCD: 160 mm
Inlet flange bolt holes: Approximately 10 mm diameter
Rectangular discharge opening: Approximately 800 × 640 mm
Flange thickness: Approximately 40 mm

The handwritten discharge-hole notation appears to indicate approximately 105 mm spacing, but the complete bolt pattern should be physically checked before duct fabrication.

Approximate Overall Dimensions and Weight
Overall length: Approximately 1,700 mm
Overall width: Approximately 1,930 mm
Overall height: Approximately 1,950 mm
Approximate total weight: 1,450 kg

These measurements include the motor, fan housing and common steel base.

Included Components
Deton KTF1000-II centrifugal fan
75kW Qin Wei three-phase motor
Direct-drive coupling and guard arrangement
Galvanised fan scroll and impeller
Rectangular discharge section
Fabricated common mounting base
Lifting lugs
Inspection/access panels
Deton KTF1000-II, 75kW centrifugal fan, 71464m3/h industrial fan, 2306Pa blower, 1000mm inlet centrifugal fan, 100hp industrial blower, 415V three phase fan, large ventilation fan, process air blower, dust extraction fan, industrial exhaust fan, direct drive centrifugal blower, galvanised centrifugal fan, Qin Wei 75kW motor, 1480rpm industrial fan, high volume air handling fan.


Contact and inspection of goods
Please contact Tim Marshman with any questions. This item may be inspected by appointment at 9 Vernon Smith Court, Ottoway, South Australia