Dimensions- 8400 X 900 X 1700 mm, Weight – 3500 kg
Electric Lifting
Feed Speed – 14/20/23m min
Minimum Panel Size – 60 X 120 mm
Working Air Pressure – 0.6 Mpa
Control System – User friendly interface
Separation Agent Device – addresses the issue of hot melt adhesive contaminating the board surface after glue application
Premilling – various defects on the processed surface can be removed
Panel Heating Unit – when temperature is low, the heating unit warms up the panels gluing surface before glue application
Gluing Unit 1- Fast Melting Adhesive + Upper Glue Pot Coating System + Automatic Glue Granule Supply
Gluing Unit 2 – Lower EVA Gluing System
Four Channel Belt Conveyors – each set is available with 4 types of edge banding (maximum width 60 mm)
Five Wheel Pressing Unit – 4 Steel Wheels + Steel Wheel Glue Scraper Device + 1 Silicone Wheel Mode
End Cutting – cut the front and rear sealing tapes, with two saw blades aligned front and rear
Rough Trimming + Pneumatic Fine Trimming – hinge hole avoidance device
Corner Rounding – (chamfering)
Different Shape Panels can be Trimmed to Fit
Two Sets of Pneumatic Edge Scrapers – Hing hole avoidance device
Flexible Flat Scraper – removes excess adhesive and impurities from the board surface
Cleaning Agent Device – dilutes residual hot melt adhesive, making the board easier to clean
2 X set of Buffing – removes excess glue residue
Deceleration Motor – 5.5kw
Rubber Coated Supporting Wheel
Facebook
Twitter
Email a Friend
NSW, VIC - Delivers Nationally 
Print
******5001 
