Enerpac BRP306 30 Ton Hydraulic Pull Cylinder Ram – 150mm Stroke

Enerpac BRP306 30 Ton Hydraulic Pull Cylinder – 150mm Stroke
Heavy-duty Enerpac hydraulic pull cylinder, believed to be model BRP306.

Designed for heavy industrial pulling, tensioning, positioning and straightening applications. The BRP series uses large replaceable link ends to provide secure attachment to the load and is commonly used for applications such as cable and bar tensioning.

This unit is in used industrial condition with extensive paint wear, scratches and workshop marks consistent with previous heavy-duty use. The large pull links are fitted at both ends and the hydraulic quick-connect coupling is present.

Specifications
Brand: Enerpac
Model: BRP306 – believed
Series: BRP
Type: Single-acting hydraulic pull cylinder
Nominal capacity: 30 ton
Maximum pull capacity: approx. 35.95 US tons
Maximum operating pressure: 10,000 psi / 700 bar
Stroke: 152.4 mm / 6 in
Factory collapsed length: approx. 964 mm
Factory extended length: approx. 1116 mm
High-strength alloy steel construction
Hard chrome-plated plunger
Spring return
Plunger blow-out protection
Replaceable pull links / lugs
Enerpac CR400 style hydraulic coupler
Enerpac specifically lists the BRP306 for heavy-duty pulling applications and gives the 6-inch stroke and 35.95-ton capacity on the current product page.

Weight
Enerpac’s published BRP306 specification gives a factory weight of approximately 48.1 kg / 106 lb.

The workshop tag fitted to this particular cylinder states:

44 kg

This is slightly below the published factory weight, so buyers should treat the identification as based on physical configuration and dimensions rather than an intact factory model plate.

Condition
Used industrial condition
Significant paint loss and cosmetic wear
Surface marks and minor corrosion visible
Hydraulic coupling fitted
Large end links fitted
Operation not confirmed unless otherwise stated
Sold as pictured
Approximate Overall Dimensions & Weight
1250 × 200 × 150 mm
Weight: approx. 44 kg as marked

Factory BRP306 dimensions are approximately 964 mm collapsed / 1116 mm extended, so the photographed overall dimension including the large end fittings is consistent with the model.


Enerpac BRP306, Enerpac hydraulic cylinder, hydraulic pull cylinder, 30 ton hydraulic ram, 30 tonne pull cylinder, 35 ton hydraulic puller, hydraulic tensioning cylinder, Enerpac ram, 150mm stroke cylinder, 6 inch stroke ram, heavy duty hydraulic cylinder, industrial hydraulic puller, 700 bar cylinder, 10000 psi cylinder, cable tensioning cylinder, bar tensioning ram, mining hydraulic equipment, engineering hydraulic tools

Contact and inspection of goods
Please contact Tim Marshman with any questions. This item may be inspected by appointment at 9 Vernon Smith Court, Ottoway, South Australia