Enerpac BRP606 60 Ton Hydraulic Pull Cylinder / Ram – 150mm Stroke

Heavy-duty Enerpac hydraulic pull cylinder, believed to be a BRP606 based on its construction, proportions and configuration.

Designed for high-force pulling, tensioning, positioning and straightening applications in industrial, structural, mining, fabrication and heavy engineering environments.

The unit is fitted with substantial pull attachments at both ends, including a large clevis-style end and elongated pull eye/link. It also has the characteristic protective rubber bellows over the piston rod.

Used industrial condition with considerable paint wear, scratches and general workshop marks as shown. No obvious major external damage visible.

Please note: the original Enerpac identification/model plate is not visible, so the BRP606 identification has not been independently confirmed. Buyers should satisfy themselves that the unit is suitable for their application.

Specifications – BRP606 reference
Brand: Enerpac
Believed model: BRP606
Type: Hydraulic pull cylinder
Pull capacity: approximately 60 ton / 588 kN
Stroke: approximately 150–153 mm / 6 in
Single-acting, hydraulic pull configuration
Protective rod bellows
Heavy-duty pull/clevis attachments
Enerpac BRP606 is the largest model in the BRP pull-cylinder range
Current suppliers list the BRP606 as a roughly 55.8–60 ton capacity, 6-inch stroke pull cylinder.

44 kg
1000 × 200 × 150 mm

However, published BRP606 weights vary between sources. Radwell lists the BRP606 at 110 lb / approximately 50 kg, while other Enerpac literature/specification sources have quoted figures closer to the high-50 kg range.

Condition

Used
Ex-industrial equipment
Heavy cosmetic wear
Paint loss and surface marks
Hydraulic operation not tested unless otherwise stated
Sold as pictured
Approximate dimensions & weight
Overall dimensions: 1000 × 200 × 150 mm
Weight: approximately 44 kg according to attached workshop tag

Keywords
Enerpac BRP606, Enerpac hydraulic cylinder, hydraulic pull cylinder, hydraulic ram, 60 ton hydraulic ram, 55 ton pull cylinder, 60 tonne cylinder, hydraulic puller, Enerpac ram, 150mm stroke cylinder, 6 inch stroke cylinder, heavy duty hydraulic cylinder, industrial hydraulic ram, tensioning cylinder, pulling ram, mining hydraulic equipment, fabrication hydraulic cylinder, Enerpac industrial tools

Contact and inspection of goods
Please contact Tim Marshman with any questions. This item may be inspected by appointment at 9 Vernon Smith Court, Ottoway, South Australia