FLAIL MOWER CONTRACTOR SERIES II – 1800

168mm (6.6 inch) diameter blade shaft for increased strength and superior balancing
Blade shaft runs on 50mm dual race SKF bearings with external access
168mm Diameter rear roller running on 40mm bearings
High discharge design to increase ground speed
Spiral placement of cutting blades to maximise the efficiency of the machine reducing the power required to drive the mower

Ability to set extra high cut (up to 100mm) which is ideal for heavier conditions as well as areas where there may be objects protruding out of the ground such as rocks or tree stumps
When fully side shifted to the non-belt side the cut will extend 1,200mm from the tractors centreline
When fully side shifted to the belt side the cut will extend 1,000mm from the tractors centreline


* Please note – photo shown is of the Contractor series III 2400



Specifications -


Horsepower: 55-100hp
Cut Width: 1,800mm
Cut Height: 50-100mm
Sideshift Hydraulic
Blade shaft 168mm
Qty blades 26
Std blades Hammer type
Belts 4 X B Section
Bearing SKF
Deck thickness 5mm
Hitch pins CAT 2
PTO rpm 540
Overall width 2,090mm
Weight 760kg




The PTO shaft is included in the price
The gear box and shaft require oil, to ensure the unit is filled in the correct location/s, to the correct level with the correct oil we suggest having us fill it at a charge of $20 inc gst
The product is shipped in a steel frame to enable cost effective freight therefore some assembly is required

12 months manufacturing warranty (Excludes consumables such as blades & belts) and 24 months gearbox warranty