Made in Germany, DPS100-H adsorption dryer of the DPS series is designed for drying compressed air and nitrogen to pressure dew points of -25°C to -70°C at operating pressures of 6 bar to 16 bar.
The desiccant has a high drying capacity and long service life. This ensures low and stable pressure dew points.
The valve blocks of the DPS100-H have generously sized air flow cross-sections. All valves required for operation of the absorption dryer are compact, free from mechanical strain and integrated into the blocks in a practically leak free manner and easy to maintain.
This DPS100-H dryer has been equipped with a frame for easier transportation and is available to hire across Australia. Contact CAPS for more details.
Features
-Welded steel vessel design to AS1210
-High quality coatings
-Low dust flow at outlet
-Compact valve blocks
-Pre and Post Filter pre-installed to dryer
-Maximum operating pressure 16 bar
-Made in Germany
Specifications
-Power Type= Elec
-Capacity (m3/min)= 16.67
-Rated Power (kW)= 0.5
-Operating Pressure (bar)= 6-16
-Max. Pressure (bar)= 16
-Dewpoint (pdp)= -25 to -70
-Voltage (V)= 240
-Frequency (Hz)= 50/60
-Inlet/Outlet Connections= 2"
-Particulate (micron) 1
-Water (pdp)= -25 to -70
-Oil (mg/m3)= 0.01
-Ambient Temperature (Degrees C)= 5-50
-Dimensions Lxlxh (mm)= 2060 x 1050 x 750
-Weight (kgs)= 560
-Noise Level dB(A)1m= 95
Options
-Switch-over control system
-GSM Module
-Start-up device (minimum pressure valve)
-Differential pressure gauges with potential free alarm contact
-Please contact CAPS for further information on other options
Facebook
Twitter
Email a Friend
WELSHPOOL, WA - Delivers Nationally 
Print
******5320 
