This 2T ride-on vibratory roller is used for compacting asphalt surfaces, gravel, sand, and other engineering foundations, as well as for compacting and repairing school playground tracks and rolling lawns. It features an original plunger pump, hydraulic drive motor, dual-drive system, hydraulic vibration and steering, and an iron water tank.
Product parameters are as follows:
Travel speed: 0-8km/h
Turning radius: 3800mm
Climbing ability: 30%
Compacted static load: 57/25N/cm (front/rear)
Nominal amplitude: 0.6mm
Vibration frequency: 70Hz
Excitation force: 40KN
Water tank capacity: 150L
Engine model: Optional Changchai 192F, Changchai 195F, or Changchai Hummer H16
Engine type: Diesel engine, air-cooled or water-cooled, four-stroke vertical single-cylinder
Power: 12HP/2400rpm
Lubricating oil volume: 1.65L
Fuel consumption: 85g/kwh
Fuel tank capacity: 8L
Wheel width (front/rear): 1000mm
Wheel diameter (front/rear): 560mm
Rear wheel center distance: 1600mm
Overall length: 2300mm Overall width: 1050mm
Overall height (with anti-tipping bar lowered): 1550mm
Packaging dimensions: Length 2200mm x Width 1100mm x Height 1580mm