Hymson HF3216G 6kW Fibre Laser | Max Source | 3200 x 1600 | 2G | Enclosed | Exchange Table

6kW Max | 3200 x 1600mm | 2g | 140m/min | ±0.03mm/m | Fully enclosed. Supplied, installed and serviced by Industrial Laser Solutions – 28 years, 650+ installs.

STILL SENDING YOUR LASER WORK OUT?
Every job you subcontract carries someone else's margin and sits in someone else's queue. The Hymson HF3216G brings it back onto your floor: 6kW of fibre power, a bed that takes a full 3000 x 1500 sheet with room to spare, a fully enclosed cabin, and an exchange table so the next sheet is loaded while the current one cuts.

KEY SPECIFICATIONS
- Model: Hymson HF3216G-6kW
- Laser source: 6kW Max Photonics fibre
- Effective cutting area: 3200 x 1600mm
- Table: exchange platform
- Enclosure: fully enclosed
- X/Y positioning accuracy: ±0.03mm/m
- Max X/Y linkage speed: 140m/min
- Max X/Y acceleration: 2g
- Max Z-axis speed: 40m/min
- Control: FSCUT 4000 (EtherCAT bus)
- Cutting head: BOCI BLT421S auto-zoom, autofocus
- Floor space (machine only): 8700 x 2800mm

SUPPLIED WITH
- Water chiller
- Voltage stabiliser
- Dust collector
(Air compressor and gas regulators not included – we can supply or spec them for you.)

WHY THE NUMBERS MATTER
- 2g acceleration: on thin sheet with small features, cycle time depends on how fast the head changes direction, not top speed. Many 6kW machines in this class run 1.2–1.5g.
- 3200 x 1600 bed: full 3000 x 1500 sheets with clearance, no tight-fit loading.
- Autofocus zoom head: focus is set by the program for each material and thickness, giving faster changeovers and less dependence on the operator.
- Exchange table: loading happens while the machine is still cutting.

WARRANTY
- 2 years on the laser source and machine body
- 12 months on cutting head, chiller, stabiliser and dust collector
- Warranty support handled locally by Industrial Laser Solutions – you deal with our Hallam team, not an overseas factory
Full warranty terms provided with your quote.

HOW THE PRICE WORKS
The listed price is the machine delivered to your nearest Australian port. Every site is different, so the rest is quoted to suit yours:
- Transport from port and placement on your floor
- Installation, commissioning and calibration by ILS engineers
- Operator training matched to your team's experience
You get one itemised quote showing the full installed cost before you commit.

LEAD TIME
Built to order: 12 weeks production plus sea freight. That gives you time to prepare power, gas, extraction and floor space so the machine is cutting from the day it lands, and we'll help you plan all of it.

WHO STANDS BEHIND IT
Industrial Laser Solutions has been in the Australian laser industry for 28 years, with 650+ installations. Our factory-trained engineers are based in Hallam, Victoria. We hold one of the largest laser parts and consumables stocks in the country, and rebuild and test cutting heads in-house. When the machine stops, you call us.

GET AN ACCURATE QUOTE
Send us a part drawing, material grades and thickness range, monthly volume, and your delivery postcode. We'll confirm the machine suits your work before we quote.

Call Cameron on or message through Machines4U.
Industrial Laser Solutions | Hallam VIC |