Hymson HF4020G 12kW Fibre Laser | 4000x2000 Bed | 25mm Plate | Exchange Table | ILS Supported

12kW | 4000 x 2000mm | 25mm mild steel, stainless & aluminium | 12mm nitrogen mild steel | FSCUT 8000. Supplied, installed and serviced by Industrial Laser Solutions – 28 years, 650+ installs.

CUTTING 4 x 2 METRE SHEET? STOP CUTTING IT DOWN FIRST.
The HF4020G takes a full 4000 x 2000mm sheet, so large panels, long parts and nests that won't fit a 3015 bed cut in one setup – no pre-shearing, no second handling, better material yield. With 12kW, mild steel up to 12mm cuts with nitrogen for a bright, oxide-free edge, and plate up to 25mm runs at production quality.

KEY SPECIFICATIONS
- Model: Hymson HF4020G-12kW
- Laser power: 12kW fibre
- Effective cutting area: 4000 x 2000mm
- Table: exchange platform
- X/Y positioning accuracy: ±0.03mm/m
- Max X/Y linkage speed: 140m/min
- Max X/Y acceleration: 1.5g
- Max Z-axis speed: 40m/min
- Control: FSCUT 8000 (EtherCAT bus)
- Cutting head: auto-zoom, autofocus
- Machine: HF-G honeycomb heavy-duty bed, drawn-aluminium cross beam
- Motion: Hymson servo and reducer, JT rack, ROUST rails
- Floor space (whole machine): 10800 x 3500mm

CUTTING CAPACITY (production quality, Hymson data)
- Mild steel (oxygen): 25mm
- Mild steel (nitrogen, bright edge): 12mm
- Stainless steel (nitrogen): 25mm
- Aluminium (nitrogen): 25mm
Thicker cuts possible for simple parts and small batches – ask us.

TYPICAL CUTTING SPEEDS (Hymson data, 12kW)
- 6mm mild steel, nitrogen: 11–13 m/min
- 10mm stainless, nitrogen: 5–7 m/min
- 20mm mild steel, oxygen: 1.3–1.5 m/min

SUPPLIED WITH
- Water chiller
- Voltage stabiliser
- Dust collector
(Air compressor and gas regulators not included – we can supply or spec them for you.)

THE HYMSON RANGE – ALL SUPPLIED BY ILS
- HF-G: proven, value-focused platform – 3216, 4020 and 6326 beds
- HyLaser PLUS: Maxphotonics Elite source, BOCI cutting heads, FSCUT 6000 and smart cutting functions
- HyLaser PRO: 2g, auto nozzle changer, SkyEye remnant nesting, 9-stage piercing, FSCUT 8000A+
Not sure which fits? Send us your parts and we'll tell you – including when the lower-cost machine does the job.

WARRANTY
- 2 years on the laser source and machine body
- 12 months on cutting head, chiller, stabiliser and dust collector
- Warranty support handled locally by Industrial Laser Solutions – you deal with our Hallam team, not an overseas factory
Full warranty terms provided with your quote.

HOW PRICING WORKS
Quoted CIF – delivered to your nearest Australian port, freight and insurance included. Import clearance, transport to your floor, installation, commissioning and operator training are quoted to suit your site. You get one itemised quote showing the full installed cost before you commit.

LEAD TIME
Built to order: 12 weeks production plus sea freight. That gives you time to prepare power, gas, extraction and floor space so the machine is cutting from the day it lands – and we'll help you plan all of it.

WHO STANDS BEHIND IT
Industrial Laser Solutions has been in the Australian laser industry for 28 years, with 650+ installations. Our factory-trained engineers are based in Hallam, Victoria. We hold one of the largest laser parts and consumables stocks in the country, and rebuild and test cutting heads in-house. When the machine stops, you call us.

GET AN ACCURATE QUOTE
Send us a part drawing, material grades and thickness range, monthly volume, and your delivery postcode. We'll confirm the machine suits your work before we quote.

Call Cameron – tap Show Number above – or message through Machines4U.
Industrial Laser Solutions | Hallam VIC