Hymson HF6326G 30kW Fibre Laser | 6300x2600 Bed | Exchange Table | ILS Supported

30kW | 6300 x 2600mm | FSCUT 8000. Supplied, installed and serviced by Industrial Laser Solutions – 28 years, 650+ installs.

PLATE WORK AT LASER QUALITY – ON A FULL 6 x 2.5 METRE SHEET
The HF6326G is built for heavy fabrication: 30kW of fibre power on a 6300 x 2600mm bed that takes full-size plate. It cuts 40mm mild steel and 30mm stainless at production quality, and mild steel up to 20mm with nitrogen for clean, oxide-free, weld-ready edges – work that used to go to plasma or a subcontractor. At 30kW, 10mm mild steel with nitrogen runs at around 11 m/min.

KEY SPECIFICATIONS
- Model: Hymson HF6326G-30kW
- Laser power: 30kW fibre
- Effective cutting area: 6300 x 2600mm
- Table: exchange platform
- X/Y positioning accuracy: ±0.03mm/m
- Max X/Y linkage speed: 110m/min
- Max X/Y acceleration: 1.5g
- Max Z-axis speed: 40m/min
- Control: FSCUT 8000 (EtherCAT bus)
- Cutting head: auto-zoom, autofocus
- Machine: HF-G honeycomb heavy-duty bed, drawn-aluminium cross beam
- Motion: Hymson servo and reducer, JT rack, ROUST rails
- Floor space (whole machine): 15800 x 3500mm

MAXIMUM CUT THICKNESS (limit of the machine – simple parts and sample work)
- Mild steel (oxygen): 80mm
- Mild steel (nitrogen): 20mm
- Stainless steel (nitrogen): 100mm
- Aluminium (nitrogen): 50mm

TYPICAL CUTTING SPEEDS (Hymson data, 30kW)
- 10mm mild steel, nitrogen: around 11 m/min
- 12mm stainless, nitrogen: around 11 m/min
- 25mm mild steel, oxygen: 1.2–1.4 m/min

SUPPLIED WITH
- Water chiller
- Voltage stabiliser
- Dust collector
(Air compressor and gas regulators not included – we can supply or spec them for you.)

THE HYMSON RANGE – ALL SUPPLIED BY ILS
- HF-G: proven, value-focused platform – 3216, 4020 and 6326 beds
- HyLaser PLUS: Maxphotonics Elite source, BOCI cutting heads, FSCUT 6000 and smart cutting functions
- HyLaser PRO: 2g, auto nozzle changer, SkyEye remnant nesting, 9-stage piercing, FSCUT 8000A+
Not sure which fits? Send us your parts and we'll tell you – including when the lower-cost machine does the job.

WARRANTY
- 2 years on the laser source and machine body
- 12 months on cutting head, chiller, stabiliser and dust collector
- Warranty support handled locally by Industrial Laser Solutions – you deal with our Hallam team, not an overseas factory
Full warranty terms provided with your quote.

HOW PRICING WORKS
Quoted CIF – delivered to your nearest Australian port, freight and insurance included. Import clearance, transport to your floor, installation, commissioning and operator training are quoted to suit your site. You get one itemised quote showing the full installed cost before you commit.

LEAD TIME
Built to order: 12 weeks production plus sea freight. That gives you time to prepare power, gas, extraction and floor space so the machine is cutting from the day it lands – and we'll help you plan all of it.

WHO STANDS BEHIND IT
Industrial Laser Solutions has been in the Australian laser industry for 28 years, with 650+ installations. Our factory-trained engineers are based in Hallam, Victoria. We hold one of the largest laser parts and consumables stocks in the country, and rebuild and test cutting heads in-house. When the machine stops, you call us.

GET AN ACCURATE QUOTE
Send us a part drawing, material grades and thickness range, monthly volume, and your delivery postcode. We'll confirm the machine suits your work before we quote.

Call Cameron – tap Show Number above – or message through Machines4U.
Industrial Laser Solutions | Hallam VIC