Hymson HyLaser PLUS 3216 12kW Fibre Laser | Max Elite | BOCI Head | 35mm Plate | ILS Supported

12kW Maxphotonics Elite | 3200 x 1600mm | 35mm mild steel & stainless | BOCI BLT442 head | FSCUT 6000. Supplied, installed and serviced by Industrial Laser Solutions – 28 years, 650+ installs.

12kW POWER WITH THE CUTTING FUNCTIONS THAT MATTER
The HyLaser PLUS 12kW pairs a Maxphotonics Elite Series source with a BOCI BLT442 head – enough power to cut mild steel with nitrogen up to 6mm for bright, weld-ready edges, and to take plate work up to 35mm. The FSCUT 6000 control adds auto edge finding, smooth micro-joints and fast piercing as standard.

KEY SPECIFICATIONS
- Model: Hymson HyLaser 3216 PLUS – 12kW
- Laser source: 12kW Maxphotonics Elite Series
- Cutting area: 3200 x 1600mm
- Cutting head: BOCI BLT442
- Control: FSCUT 6000, 21.5" screen
- Max X/Y linkage speed: 140m/min
- Max X/Y acceleration: 1.5g
- Piercing: 3-stage
- Table: exchange platform
- Enclosure: fully enclosed

BUILT-IN CUTTING FUNCTIONS
- Auto edge finding and high-speed edge finding – sheet position detected automatically, shorter setup between jobs
- Find edge protection
- Smooth MicroJoint – parts held securely during cutting, clean separation, less rework
- Fast piercing and cooling point
- Follow skipping and smart laser off – less wasted motion between cuts

TYPICAL MAXIMUM CUTTING CAPABILITY (Hymson data)
- Mild steel (oxygen): 35mm
- Mild steel (nitrogen): 6mm
- Stainless steel (nitrogen): 35mm
- Aluminium (nitrogen): 30mm
Production thickness depends on part geometry and edge quality required – send us your parts and we'll confirm.

SUPPLIED WITH
- Water chiller
- Dust collector
(Air compressor and gas regulators not included – we can supply or spec them for you.)

THE HYMSON 3216 RANGE – ALL SUPPLIED BY ILS
- HF3216G: proven, value-focused platform
- HyLaser PLUS: Maxphotonics Elite source, BOCI cutting heads, FSCUT 6000 and smart cutting functions
- HyLaser PRO: 2g, auto nozzle changer, SkyEye remnant nesting, 9-stage piercing, FSCUT 8000A+
Not sure which fits? Send us your parts and we'll tell you – including when the lower-cost machine does the job.

WARRANTY
- 2 years on the laser source and machine body
- 12 months on cutting head, chiller and dust collector
- Warranty support handled locally by Industrial Laser Solutions – you deal with our Hallam team, not an overseas factory
Full warranty terms provided with your quote.

HOW PRICING WORKS
Quoted CIF – delivered to your nearest Australian port, freight and insurance included. Import clearance, transport to your floor, installation, commissioning and operator training are quoted to suit your site. You get one itemised quote showing the full installed cost before you commit.

WHO STANDS BEHIND IT
Industrial Laser Solutions has been in the Australian laser industry for 28 years, with 650+ installations. Our factory-trained engineers are based in Hallam, Victoria. We hold one of the largest laser parts and consumables stocks in the country, and rebuild and test cutting heads in-house. When the machine stops, you call us.

GET A QUOTE
Send us a part drawing, material grades and thickness range, monthly volume, and your delivery postcode. We'll confirm the machine suits your work before we quote.

Call Cameron – tap Show Number above – or message through Machines4U.
Industrial Laser Solutions | Hallam VIC