JCB 525-60 Telehandler - Hire

JCB 2.5 Ton Telehandler. Daily, Weekly and Long Term Hire. Call us for a deal !!!.
2021 Model Very Reliable, lifting jib available. Long term hire Australia Wide.


ENGINE STAGE V
Latest Stage V technology and advanced design provides low fuel consumption, reduced noise, high torque and power output,
total reliability and minimal maintenance. Two-stage, dry type air filter with primary and safety elements. Territory dependent.
Manufacturer JCB DIESEL BY KOHLER
Displacement ltr 2.5
No. of cylinders 4
Bore size mm 88
Stroke mm 102
Aspiration Turbocharged cooled
Power rating
Power 2200rpm kW (hp) 55 (74)
Torque rating
Torque 1500rpm Nm 310

HYDRAULICS
Two stage gear pump, fitted with suction strainer and filter. Boom end auxiliary services are optional.
Operating system pressure bar 235
Flow at system pressure 2200rpm ltr/min 80
Hydraulic cycle times Seconds
Boom raise 7.6
Boom lower 5.3
Boom extend 7.5
Retract 3.7
Bucket dump 1.9
Bucket crowd 2.9

ELECTRICS
System voltage Volt 12
Alternator output Amp hour 100
Battery capacity Amp hour 120
Full road lighting. Reversing light. Direction indicators. Hazard warning. Reverse alarm.

SERVICE FILL CAPACITIES
Hydraulic system litres 65
Fuel tank litres 75

TRANSMISSION
Closed loop variable displacement pump with a continuously variable hydrostatic drive. Comprising of a hydraulic motor and control unit.
Permanent 4 wheel drive. Travel speed: 25kph (15mph), 20kph (12mph) (TUV).
Forward Reverse
Low range kph 12 12
High range kph 25 25

STEERING
Hydrostatic power steering with power track rods on both axles.
Three steer mode options: Front wheel steer, all wheel steer, crab steer, operated from in the cab by a selection lever.
Option: In cab selector switch with Auto Align.

CAB
Quiet, safe and comfortable cab conforms to ROPS ISO 3471 and FOPS ISO 3449. Tinted glass all round, with laminated roof screen.
Roof bars, front screen and roof screen wipers and heater/screen demister. Rear opening window with wash/wipe. Audio-visual
warning system for coolant temperature, engine oil pressure, air-cleaner, battery charge, transmission oil temperature and pressure, water in fuel, hourmeter, road speed indicator, fuel gauge, engine temperature, clock and inclinometer. Adjustable suspension seat, tilt steer column, park brake, floor mounted throttle and brake pedals.
Hydraulic controls: Single lever servo joystick, incorporating forward/neutral/reverse, with progressive extend/retract and auxiliary incorporating constant flow facility.
Load Moment Indicator: Automatic eye level audio-visual load moment indicator warning system receiving a signal from a load sensor on the rear axle. This system continuously monitors the machine’s forward stability and leaves the operator in control at all times.

OPTIONS
Options: Front and rear working lights, rotating flashing beacon, fire extinguisher, front screen guard, air conditioning, boom end auxiliary services, sunblind, radio kit, carriage hydraulic locking, limited slip differential in front axle, air suspension seat, 2-speed and intermittent front wash/wiper.
Attachments: Contact your local dealer for details of the comprehensive range.
*Adaptive Load Control for EU territories conforms to EN15000.

BOOM AND CARRIAGE
Boom is manufactured from high tensile steel. Low maintenance, hard wearing pads. JCB Q-Fit, JCB compact toolcarrier, Skid-Steer.

BRAKES
Service brakes: Hydraulically operated self-adjusting, oil-immersed in-board multi-disc type mounted on front axle.
Parking brake: SAHR Handbrake self adjusting, oil immersed in-board multi disc type mounted on front axle operated by in-cab switch.

AXLES
Front and rear drive JCB axles: epicyclic hub reduction drive/steer axles with torque proportioning differentials.

NOISE AND VIBRATION
Uncertainty Measurement conditions
Noise at the operator station (LpA) 76 dB +/– 1 dB Determined in accordance with the test method defined in EN12053.
Noise emission from the machine (LWA) 103 dB +/– 1 dB Guaranteed equivalent sound power (external noise) determined in
accordance with the dynamic test conditions defined in 2000/14/EC.
Whole body vibration (m/s²) 0.43 0.22 ISO 2631-1:1997 normalised to an 8h reference period and based
upon a test cycle defined in SAE J1166.
Hand-arm vibration (m/s²)