JCB G33QS Generator - Extended Fuel Tank

JCB G33QS Diesel Generator – 30.9 kVA

Overview:

* JCB G33QS diesel generator with 30.9 kVA Prime Power and 34.0 kVA Standby Power.
* Designed for reliable continuous prime power or standby power applications
* 400/230 V three-phase electrical output
* 50 Hz operating frequency
* 1500 RPM operating speed
* Compact acoustic canopy design
* Suitable for construction, commercial, agricultural, industrial, rural and backup power applications
* Manufactured to JCB specifications and supported by established JCB generator technology

Key Features:

* 30.9 kVA Prime Power
* 34.0 kVA Standby Power
* 24.7 kW Prime Power
* 27.2 kW Standby Power
* 400/230 V output
* 50 Hz frequency
* 3-phase configuration
* 1500 RPM
* Kohler/JCB 4-cylinder diesel engine
* Turbocharged engine
* Direct fuel injection
* Water-cooled engine
* Brushless alternator
* Automatic Voltage Regulator (AVR)
* JCB 4520 controller
* 81 L standard fuel tank
* 110 Ah lead-acid battery
* Acoustic canopy
* High-density fire-retardant foam
* Residential silencer
* Lockable maintenance access doors
* Emergency stop button
* External emergency stop button
* 3-pole moulded case circuit breaker
* Fuel level sender
* Pre-filter with water separator
* Radiator guards
* Preparation for earth spike
* CE-certified generator package

Electrical Specifications:

* Prime Power: 30.9 kVA / 24.7 kW
* Standby Power: 34.0 kVA / 27.2 kW
* Voltage: 400/230 V
* Frequency: 50 Hz
* Phase: 3 Phase
* Power Factor: 0.8
* Rated Speed: 1500 RPM
* MCB Rating: 50A
* Minimum ATP Rating: 50A
* Maximum Load Impact: 28.00 kVA / 22.40 kW

Prime Power Rating:

* Rated at 30.9 kVA / 24.7 kW Prime Power
* Intended for continuous electrical power supply at variable load
* Suitable for applications where generator power is used in place of commercially purchased power
* No annual operating hour limitation stated for the Prime Power rating
* 10% overload power can be supplied for 1 hour in every 12 hours
* Ratings are based on standard reference conditions in accordance with ISO 8528

Standby Power Rating:

* Rated at 34.0 kVA / 27.2 kW Standby Power
* Designed to provide continuous power during utility power failure
* Intended for standby/emergency power applications

Engine Specifications:

* Manufacturer: Kohler/JCB
* Engine Model: KDI 2504 M-30
* Fuel: Diesel
* Cylinders: 4
* Aspiration: Turbocharged
* Injection System: Direct injection
* Displacement: 2.482 L
* Bore x Stroke: 88 x 102 mm
* Prime Engine Output: 28.0 kW
* Standby Engine Output: 31.0 kW
* Cooling System: Water cooled
* Governor: Mechanical
* Compression Ratio: 11.5:1
* Engine Oil Capacity: 11.3 L
* Coolant Capacity: 7.6 L
* Air Filter: Single paper element
* Engine Oil Specification: API CH4 / SAE 10W40
* Engine Oil Consumption at 100% Load: 0.1% of fuel consumed

Alternator:

* Alternator Model: ECP32 2S/4
* Poles: 4
* Winding Connection: Star
* Insulation Class: H
* Enclosure: IP23
* Excitation System: Self-regulating brushless
* Voltage Regulation: AVR
* Steady-State Voltage Regulation: ±1.0%
* Bearing: Single bearing, sealed
* Coupling: Flexible disc
* Cooling: Direct-drive centrifugal blower fan
* Winding Protection: Grey coating

Fuel System:

* Fuel Type: Diesel
* Diesel Specification: N590
* Standard Fuel Tank Capacity: 500L
* 82hr Run Time During 100% Load
* Fuel Level Sender: Standard
* Pre-filter with separator: Standard
* Internal fuel fill: Standard
* 3-way fuel valve: Optional
* Fuel system designed for practical operation and easy refuelling

Fuel Consumption:

* 100% Prime Load: 6.08 L/hr
* 75% Prime Load: 4.36 L/hr
* 50% Prime Load: 3.24 L/hr
* 100% Standby Load: 6.52 L/hr

Canopy & Acoustic Features:

* Lockable maintenance access doors
* Control panel viewing window
* High-density fire-retardant acoustic foam
* Standard yellow paint finish
* White paint available as an option
* Residential silencer
* Radiator guards
* Cooling pack
* Pre-filter with separator
* Internal fuel fill
* Fuel level sender
* Bunded Base
* Manual oil drain pump
* Fork pockets
* Single lift point
* Hot component guards
* Open-frame configuration available as an option
* Water jacket heater available as an option

Noise Level:

* Sound pressure level: 62 dB(A) at 7 metres
* Acoustic canopy designed to reduce operating noise
* Suitable for applications where controlled noise levels are important

Starting System:

* Starter Motor: 2.0 kW
* Battery Type: Lead Acid
* Battery Capacity: 110 Ah
* Number of Batteries: 1
* Auxiliary Voltage: 12 V
* Battery isolator
* Battery charger

Control System

* DSE 4520 MKII Controller fitted as standard
* Emergency stop button
* External emergency stop button
* AVR monitoring and regulation
* MAUX auxiliary system

Protection & Electrical Features

* 4-pole moulded case circuit breaker
* Earth leakage protection available as an option
* Preparation for earth spike
* Emergency stop button
* External emergency stop button
* AVR DSR
* Grey winding protection
* PMG available as an option
* Anti-condensation heater available as an option
* Remote screen available as an option
* Optional voltage configurations available

Mechanical Features

* Cooling pack
* Single paper-element air filter
* Mechanical governor
* Low oil pressure switch
* Coolant temperature sender
* Oil temperature sender
* Radiator guards
* Pre-filter with separator
* Fuel level sender
* Internal fuel fill
* Residential silencer

Air System

* Intake air flow at 100% Standby: 144 m³/hr
* Total cooling air flow at 100% Standby: 0.49 m³/s
* Alternator fan airflow: 0.20 m³/s

Exhaust System:

* Maximum exhaust temperature: 510°C
* Exhaust gas flow: 2.71 m³/min
* Maximum allowed back pressure: 80 mbar
* Exhaust flange size: 51.5 mm
* Residential silencer fitted as standard
* Industrial silencer: Not available according to the datasheet

Dimensions & Weight:

* Length: 2,250 mm
* Width: 840 mm
* Height: 1,350 mm
* Weight: 1,000 kg
* Shipping volume: 2.55 m³
* Weight is based on standard build with all fluids except fuel

Compliance & Standards:

* CE certified
* Stage IIIA diesel generator
* Stage IIIA emissions compliance at 50 Hz Prime Power in accordance with **97/68/EC**, as stated by the manufacturer
* EN 12100
* EN 13857
* EN 60204
* Machinery Safety Directive 2006/42/EC
* Low Voltage Directive 2006/95/EC
* Electromagnetic Compatibility Directive 2004/108/EC
* Sound Power Level Directive 2000/14/EC
* Emissions Directive 97/68/EC
* ISO 8528
* ISO 3046
* Ambient reference conditions: 1000 mbar, 25°C and 30% relative humidity in accordance with ISO 3046

CE Pack Features:

The optional CE Pack includes:

* EMC Certification
* Hot Guards
* Belt Guards
* Earth Leakage Relay
* Sound Power Decal
* EU Declaration for Engine Emissions
* Complete Machine Declaration of Conformity

Applications:

* Construction sites
* Commercial premises
* Industrial applications
* Agricultural operations
* Rural properties
* Workshops
* Emergency and backup power
* Temporary power
* Events and site facilities
* General three-phase power requirements