The Deduster Series CART-FILTER consists of cartridge filters, suitable for the handling of the dust in the intake air. Dedusters use a filter element of textile structure, with backpressure blast-cleaning of cartridges. The dusty air enters an area under the cartridges in a tangential way and, owing to a cyclone effect, it loses its speed and the heavier parts, carried by the fluid, fall, by centrifugal effect, into the hopper, thus safeguarding the cartridge life.
The intake air flows through the cartridges with upward lift motion, thus leaving the polluting dust on the cartridge outside. The cartridge jarring because of the compressed air helps the detachment of dust from the cartridge and its falling into the hopper. The polluting remnants in the air are retained by the filter while passing through the cartridge and finally the air, which now is clean, is blown off through a further filter.
The cartridges blasted by the compressed air flowing out from a set of nozzles, located over the cartridges. The compressed air let into the Venturi tube installed in each filter-bag calls up the clean air flowing out from other bags and creates a pressure wave which spreads out over the entire length of the bag, thus causing its jarring. The dust falls from the external surface of the bag into the hopper, where from it is taken off for recovery and/or disposal.
Make: Savio
Model: Cartfilter 60
Year: 2005
Made in Italy
Filter Cartridge: (x3) Viledon LP324G12
Voltage: 400V
Motor Power: 11kW
Overall Dimensions (mm): 2350 x 1800 x3500