MagVise EEPM Electro-Permanent Magnets provide an easy and conveinent method of clamping workpieces, reducing normal clamping time, securely holding rough or irregular shaped jobs and allowing unobstructed five sided machining.
Featuring
Super power magnetic force of 1000kgf/sq metre.
3~10 seconds control for power on and off.
No electric power supply is required to keep the magnetic chuck on, providing safety in the event of a power failure.
It is possible to machine 5 sides of a workpiece, with unobstructed movement of the cutter during machining.
Only one cycle is required to finish a workpiece helping to achieve the best machining accuracy and increasing efficiency.
Applications:
Most suitable for medium and small or even rough workpieces.
Suitable for drilling and finishing machining on small workpieces.
Minimum size of workpiece required as 4 alternate magnetic square poles and above contacts are necessary for optimum clamping.
Minimum thickness of workpiece required is 10mm.
A broader range of functions are available with the addition of Induction Blocks and Spring Blocks
Delivery and ongoing support Australia wide.
Please call for additional information.