New 0.8-1.7 ton (25mm pin) Excavator Headstock Hitch Mounting Plate

New 25mm pin Excavator / Backhoe Headstock Hitch Mount to suit 0.8-1.7 ton machines.

Can be used as a regular headstock to be welded to buckets and other attachments etc.
Can also be used for a mounting headstock to a Rock Breaker Hammer (already has the bolt holes on the plate) or could also be configured for an Auger mount.

There is a center pin on the underside (see Pic# 10) which may have been fitted to allow it to become a pivoting headstock for a plate compactor or similar. Just cut this off if you don't plant to use the pivoting feature.

Plate Thickness is 12mm.


*** Current Headstock configuration:
* Pins: 25mm.
* Pin Center to Pin Center (CtoC): 99mm.
* Between the Ears (BTE): 100mm Between the inside Ear Bosses (which can be shaved back up to 135mm between the Ear Plates if you need more inside width for your hitch or dipper arm to fit in).
*
* Should fit: Bobcat 316, Kobelco SK 09SR / SK 09SR / PC 03 / PC 09-1, Nagano NS 08-2, SMC MX08, Yanmar B 7 / B 8-3 / VIO10.
*
* Maybe fit: Case CK 15, Daewoo Solar 007 / 010 / 015, JCB 801 / 801.4 / 8018, Kobelco SK 07, Kubota KH 05 / KH 12 / KH 35 / KH 36 / KH 41 / KX 30 / KX 36 / KX 41 / KX 41-2 / KX 41-3 / U17-3, Takeuchi TB 07 / TB 108 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).


Shipping dimensions: 260mm Wide, 288mm Deep, 209mm High. Weight: 17kg.


Call if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.