New 0.8-1.7 ton (25mm pin) Mini Excavator Flail Mower Brush Cutter

New 0.8-1.7 ton (25mm pin) Mini Excavator Flail Mower Brush Cutter.

Unlike a slasher, a Flail Mower is more tolerant of rocky and uneven ground.
The Flails (see pic# 10) hang off the rotating drum and bounce back when they hit something more solid than grass or small sticks, reducing shock load to the drive system, and produces a cut that contours over the bumps and rocks etc.

It is not quite as fast as a larger slasher for clearing huge paddocks of grasses, but the cut finish is still nice if not nicer than a slasher as the grasses do get a bit more mulching than with a slasher which mostly just levels the cut grasses flat.

The best thing about having a Flail Mower on an excavator is you can reach over fences or up into trees, vines, big lantana bushes etc.

Please note!
This is a Mower for grasses, smaller sticks & branches, brush, general vegetation management etc. Although it will mulch smaller debris, this is not a Mulcher where you can shred a tree stump into wood chips.

* 600mm (24") Cut Width.

* Includes Hoses.

* The black slider skids at the bottom on either end are adjustable so you can change the cut height when hovering over the ground.

* Currently fitted with 12 groups of 3 Y-Blades, best for regular grass mowing, high-volume fine cutting, and field maintenance, offers a cleaner shredding/chopping action on soft green residue.


*** Headstock Setup:
* Pin Diameter: 25mm.
* Pin Center to Pin Center (CtoC): 90mm.
* Between the Ears (BTE): the distance between the headstock bosses is 94mm, but these welded-on-bosses could also be shaved back on the insides to a maximum of 102mm (the distance Between the Ear Plates), if you need more inside width for your hitch or dipper arm to fit into.

Should fit: Airman AX08, Agrotk Industrial AGT QS12R / QS-12R / QS12K / QS-12K / HQ12 / HQ-12 / H12 / H-12 / L12 / L-12, DLK Industrial DK12 / DK-12, FF Industrial FF12 / FF-12 / FF13 / FF-13, Hitachi EX 08, Lanty LAT13 / LAT-13, Komatsu PC 02, Machpro MP15 / MP-15, Vicsec VC13 / VC-13 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).


Shipping Dimensions: 795mm Long, 415mm Wide, 580mm High.
Weight: 78kg.


Call if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.