New 1-3 ton (30mm pin) Excavator Headstock Hitch Mounting Plate

New 30mm pin Excavator / Backhoe Headstock Hitch Mount to suit 1-3 ton machines.

Can be used as a regular headstock to be welded to buckets and other attachments etc.
Can also be used for a mounting headstock to a Rock Breaker Hammer (already has the bolt holes on the plate) or could also be configured for an Auger mount.

There is a center pin on the underside (see Pic# 10) which may have been fitted to allow it to become a pivoting headstock for a plate compactor or similar. Just cut this off if you don't plant to use the pivoting feature.

Plate Thickness is 16mm.


*** Current Headstock configuration:
* Pins: 30mm.
* Pin Center to Pin Center (CtoC): 109mm.
* Between the Ears (BTE): 111mm Between the inside Ear Bosses (which can be shaved back up to 128mm between the Ear Plates if you need more inside width for your hitch or dipper arm to fit in).
*
* Should fit: Hitachi UE10, IHI 18J, Volvo ECR18E, Yanmar B 14 / VIO15-1 / VIO15-2 / VIO17.
*
* Maybe fit: Airman AX12, Bobcat 322 / 323 / E17 / E20 / X320 / X322, Case CX 14 / CX 15, Hitachi EX12 / EX15 / EX16, Kobelco SK 13SR / SK 13SR-2 / SK 15 / SK 16 / SK 16E / SK 16MSR / SK 17 / SK 17E, Komatsu PC 05 New Type / PC 05 Old Type / PC 07 / PC 07 New Type / PC 12R-8 / PC 12 New Type / PC 15MRX-1 / PC 15R-8 / PC 15 New Type, Pel Job EB 12, Takeuchi TB 15, Volvo EC14 / EC15, Yanmar B 10 / B 12 / B 15 / B 17 / B 121 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).


Shipping dimensions: 258mm Wide, 286mm Deep, 174mm High. Weight: 20kg.


Call if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.