New 1.5-4 ton (35mm pin) Excavator Headstock Hitch Mounting Plate

New 35mm pin Excavator / Backhoe Headstock Hitch Mount to suit 1.5-4 ton machines.

Can be used as a regular headstock to be welded to buckets and other attachments etc.
Can also be used for a mounting headstock to a Rock Breaker Hammer (already has the bolt holes on the plate) or could also be configured for an Auger mount.

There is a center pin on the underside (see Pic# 10) which may have been fitted to allow it to become a pivoting headstock for a plate compactor or similar. Just cut this off if you don't plant to use the pivoting feature.

There is also some pitting in the headstock well area (see pic# 9) from being stored outside for a period. The pitting is not deep enough to compromise the strength of the headstock. We have cleaned the loose rust off and given it a protective coat of paint.

Plate Thickness is 16mm.


*** Current Headstock configuration:
* Pins: 35mm.
* Pin Center to Pin Center (CtoC): 183mm.
* Between the Ears (BTE): 141mm Between the inside Ear Bosses (which can be shaved back up to 165mm between the Ear Plates if you need more inside width for your hitch or dipper arm to fit in).
*
* Should fit: Airman AX22 / AX29U / AX30UR, Case CX 23 / CX 25 / CX 26 / CX 28 / CX 30 / CX 31, Daewoo Solar 027 / 030, Hanix H26B-2 / H30B-2, Hitachi EX22 / EX25, IHI (Cheiftain) 25G/H/J / 28G/H/J / 30G/H/J / 30NX, Kobelco SK 20SR-3 / SK 20 / SK 24 / SK 25 / SK 25SR / SK 25SR-2 / SK 27 / SK 27SR-2 / SK 27SR-3 / SK 30 / SK 30SR Pre 2001 / SK 30SR / SK 30UR, Komatsu PC 20 / PC 20-6 / PC 30-6, Libra 225S / 229S, Nagano NS 25-3, New Holland EH 27.B, SMC MX30, Takeuchi TB 25 / TB 26 / TB 28FR / TB 125, Yanmar B 22 / VIO20 / VIO20-1 / VIO20-2 / VIO20-3.
*
* Maybe fit: Bobcat 331 / 430 / X325 / X328 / X331, Caterpillar 302.5, Komatsu PC 20-7 / PC 25-1 / PC 27R-8 / PC 28UU-2 / PC 30-7 / PC 30MRX / PC 30MRX-1 / PC 30R-8 / PC 35R-8 / PC 35R-8E / PC 38UU-2, Libra 2345, New Holland EC 25, Pel Job EB 28-4 / EB306, Scat Trak 535, Sunward SWE 40U, Volvo EC20, Yanmar B 19 / B 201 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).


Shipping dimensions: 280mm Wide, 297mm Deep, 240mm High. Weight: 28kg.


Call if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.