New Aussie Buckets Excavator Hydraulic Dual Locking Titling Quick Hitch Coupling to suit 2-4 Ton machines.
Designed for Komatsu PC 10-7 / PC 20R-8 / PC 20R-8 / PC 20MRX but will fit other machines (see below list of machines we have found so far..)
* Dual Locking (hardened steel locking wedges with integrated safety valves provide maximum hold under load).
* Tilt Degree: Full 180° range.
* Lifting Capacity: 1,500kg.
* Fully sealed bearing and rotor system.
* Has rear Lift Hook, Rated WLL: 2,000kg.
* Tilt Pressure: 210 Bar.
* Tilt Flow: 3.3-6.8 L/min.
* Ram Pressure: 25-300 Bar.
* Ram Flow: 15-25 L/min.
Comes with hoses as pictured, fitted with Quick Release Couplings.
This is a well engineered, heavy duty Hydraulic Tilting Hitch, made by Aussie Buckets.
This Tilting Hitch is built around a 1-size larger tilting barrel setup than would be usual for a normal 30mm pin machine, to accommodate the longer than common Komatsu Pin Center distance of 205mm.
It is currently setup for 30mm pins, but could possibly be modified to suit 35mm by boring out the pin holes to 35mm, and inserting 35mm pins. Then grind out some material from the lower hooks to fit 35mm pins.
***** Headstock Dimensions:
*** Pin Setup Dimensions (where your Dipper Arm goes in):
* Pin Diameter: 30mm (possible to make this suit 35mm pins).
* Pin Center to Pin Center (CtoC): 205mm.
* Between The Ears (BTE): 155mm Between the inside Ear Bosses of the hitch (which can be shaved back up to 189mm between the Ear Plates if you need more inside width for your excavator's dipper arm to fit in).
*** Pin Setup Dimensions (where the Hitch goes in your bucket):
* Pin Diameter: 30mm (possible to make this suit 35mm pins).
* Pin Center to Pin Center (CtoC): Variable Distance Pickup: 186mm - 225mm.
* Between The Ears (BTE): 138mm with the side wings welded on. Removing these extra width-packing wings would bring the width down to 106mm if you need it narrower to fit it in your buckets.
*** As a 30mm Pin Configuration: (Current)
* Should fit: Komatsu PC 10-7 / PC 20R-8 / PC 20R-8 / PC 20MRX.
* Maybe fit: Komatsu PC 10-7E / PC 20MRX-1 and possibly other machines with similar pin spacings.
*** As a 35mm Pin Configuration: (Bore out the pin holes to 35mm, insert 35mm pins. Grind out some material from the lower hooks to fit 35mm):
* Should fit: Bobcat 331 / 430, Komatsu PC 20-7 / PC 27R-8 / PC 28UU-2.
* Maybe fit: Airman AX22 / AX29U / AX30UR, Hitachi EX22 / EX25, IHI (Cheiftain) 25G/H/J / 228G/H/J / 230G/H/J / 30NX, Kobelco SK 30SR Pre 2001 / SK 30SR / SK 30UR, Komatsu PC 25-1 / PC 30-7 / PC 30R-8 / PC 30MRX / PC 30MRX-1 / PC 35R-8 / PC 35R-8E / PC 38UU-2, Libra 225S and possibly other machines with similar pin spacings.
Hitch dimensions (standing up as in pics): 447mm long, 282mm wide, 526mm high.
Weight: 108kg (including hoses).
Call if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.