New 4-10 ton (45mm-65mm Pin) Excavator Hydraulic Vibratory Plate Compactor

New Excavator Hydraulic Vibratory Plate Compactor suit 4-10 Ton machine.

Great tool for compacting soil, sand, gravel & stones etc. to a flat surface. Good for packing down the bottom of narrow trenches, road construction, building foundations, slope compacting etc.

Required Oil Flow: 45-75 L/min.
Working Pressure: 110-140 kg/cm2 (1564-1991 psi).
Impact Rate Max: 2000 rpm.


*** Current Headstock Dimensions:
* The Pin Diameter is 45mm but they are fitted into collar bosses that fit into 65mm diameter Pin holes (see pic# 10), so pins up to 65mm diameter can be fitted without needing to bore out the holes in the compactor's headstock. eg. to configure it for 50mm pins: bore out the holes in just the removable collars (see pic #10) and insert bigger pins.
* The Pin Center to Pin Center (CtoC) is 263mm.
* The distance between the collar bosses is 156mm. Removing the collar bosses, the distance between the headstock bosses is 211mm, but these welded-on-bosses could also be shaved back on the insides to a maximum of 238mm (the distance Between the Ear Plates), if you need more inside width for your hitch or dipper arm to fit into.

*** 45mm Pin configuration (current):
*
* Should fit: Case CX 47 / 50B, Caterpillar 304C CR / 304CR-ISJ / 305C CR / 305CR-ISJ, 306, Daewoo Solar 055 / 055V / 055V PLUS, Doosan S 55-V, Hitachi EX55UR / EX55UR Import, Kobelco 45SR-2 / 50SR-3 / SK 50UR-2, Komatsu PC 50UU-1 / PC 50UU-2, Samsung SE 50W, Yanmar B 50 / B 50-2 / B 50-2B / VIO40-1 / VIO40-2 / VIO40V / VIO45 / VIO45-5 / VIO50 / VIO50-1 / VIO50-2 / VIO55 / VIO55-5.
*
* Maybe fit: Daewoo Solar 070 / 075-V, Doosan S 75-V, Ferguson MF 760 / MF 860, Fermac 760 / 860, Hitachi EX58MU, Hyundai R 55-7, Komatsu PC 40 / PC 45R-8 / PC 45R-8E / PC 58UU-3, Kubota KH151 / KH161-3 / KH191 / KX151 / KX161-2 / KX161-3 / KX191 / RX501 / U45 / U55, Samsung SE 50-3, Volvo EC50/W / EC55 / EC55B / ECR58 / MX 55/W / SE 50-3, Yanmar YB 50 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).

*** As an 50mm Pin configuration (bore out Collars & insert 50mm pins):
*
* Should fit: Ackerman H3, Kato 140, Schaeff HR31.
*
* Maybe fit: Bobcat 442 / X442 / zx125, IHI 50 / 55J / (Cheiftain) 55J / (Cheiftain) 65UJ / 70Z, Ingersoll-Rand ZX125, Kobelco 70SR / SK 60 / SK 70SR / SK 70SR-1E / SK 75UR / SK 80MSR, Schaeff HR32, Sumitomo SH 65U w/ Knuckle Boom, Terex HR32, Wacker Neuson 5002 / 6002 / 6003 / 6502 / 6503 / 50z3, Yanmar B 7 and possibly other machines with similar pin spacings or that have a variable pin spacing hitch (Multi-Hitch).


Dimensions: 821mm Long, 521mm Wide, 658mm High. Weight: 254kg.


Call if you would like to discuss or to come inspect it.
We are at Pullenvale, 16km west of Brisbane CBD, between Brookfield and Anstead, near Kenmore.
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.